Makita JR3051TK - Инструкция по эксплуатации - Страница 4

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

JR3051T

Length of stroke

30 mm

Strokes per minute

0 - 3,000 min

-1

Max. cutting capacities

Pipe 

(with 300 mm blade)

130 mm

Wood 

(with 300 mm blade)

255 mm

Overall length

447 mm

Net weight

3.2 - 3.3 kg

Safety class

/II

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications may differ from country to country.

• 

The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to 

EPTA-Procedure 01/2014, are shown in the table.

Intended use

The tool is intended for sawing wood, plastic, metal and 

building materials with a strong impact. It is suitable for 

straight and curved cutting.

Power supply

The tool should be connected only to a power supply of 

the same voltage as indicated on the nameplate, and 

can only be operated on single-phase AC supply. They 

are double-insulated and can, therefore, also be used 

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord

-

ing to EN62841-2-11:

Sound pressure level (L

pA

) : 88 dB(A)

Sound power level (L

WA

) : 99 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

 The declared noise emission value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may 

also be used in a preliminary assessment of exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the tool is 

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such 

as the times when the tool is switched off and when 

it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-2-11:

Work mode: cutting boards

Vibration emission (a

h,B

) : 19.5 m/s

2

Uncertainty (K) : 1.5 m/s

2

Work mode: cutting wooden beams

Vibration emission (a

h,WB

) 19.5 m/s

2

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.