D-Link DWL-3610AP - Инструкция по эксплуатации - Страница 3

D-Link DWL-3610AP Quick Install Guide  



  3

D-Link DWL-3610AP Quick Install Guide  



  3

E

NG
LIS

H

Power on the access point

To power on the DWL-3610AP, you can use ONE of 

the following methods:

1. Connect the supplied power adapter 

    OR  

2. Plug one end of an Ethernet cable into the LAN 

port of the DWL-3610AP and the other end into 
a port on a PoE switch.

Configure the access point

To set up and manage the DWL-3610AP, use one 

of the following methods: 

• 

Manage the access point from the computer: 

Connect the access point and your computer 

directly via a straight-through Ethernet cable. 

Mounting Options

You can mount a DWL-3610AP access point on any 

of the following types of surfaces:

• Solid surface wall or ceiling

• Tabletop

Cable Requirement

Use a CAT 5 cable with an even sheath.

The Ethernet ports on the DWL-3610AP access 

point cannot accept a CAT 5 cable that has an 

uneven sheath; the RJ-45 connector on the cable 

will not fit properly into the receptacle on the access 

point. 

Wall Installation Recommendations

If you plan to install the DWL-3610AP on a wall or 

other vertical surfaces, orient the top of the access 

point (the side with the LEDs) toward the intended 

coverage area. The radio antennas transmit through 

the top of the access point but not through the 

bottom (where the bracket is). 

Warning:

 The DWL-3610AP is designed to 

receive PoE power only from an 802.3af-compliant 

source, or from a D-Link-approved power injector. 

Connecting an access point to a Power over 

Ethernet (PoE) device that is not approved by 

D-Link can damage the equipment.

Warning:

 This product is to be connected only to

PoE networks without routing to the outside plant.

The equipment power cord must be connected to

a socket-outlet earthling connection.

• 

Manage the access point from the computer 

via the Switch or Router: Connect the 

access point and your computer to the same 

switch or router. 

Reset Button

Installation

Computer

DWL-3610AP

Computer

DWL-3610AP

Computer

DWL-3610AP

Switch or Router

• 

Manage the access point from the computer 

via the Unified Wireless Switch or Wireless 

Controller: Connect the access point to 

a Unified Wireless Switch or Wireless 

Controller. Connect your computer to the 

same network as that of the Unified Wireless 

Switch or Wireless Controller.   

Computer

DWL-3610AP

Computer

DWL-3610AP

Unified Wireless Switch

or

Wireless Controller

Power Button

(For Power Adapter)