ASUS ZenWiFi XT8 1PK AX6600 - Инструкция по эксплуатации - Страница 51

51

To configure the basic wireless settings:

1.  From the navigation panel, go to 

Advanced Settings

 > 

Wireless

 > 

General

 tab.

2.  Select 2.4GHz or 5GHz as the frequency band for your wireless 

network.

3.  Assign a unique name containing up to 32 characters for your 

SSID (Service Set Identifier) or network name to identify your 

wireless network. Wi-Fi devices can identify and connect to 

the wireless network via your assigned SSID. The SSIDs on the 

information banner are updated once new SSIDs are saved to 

the settings.

NOTE

:   You can assign unique SSIDs for the 2.4 GHz and 5GHz frequency 

bands. 

4.  In the 

Hide SSID

 field, select 

Yes

 to prevent wireless devices 

from detecting your SSID. When this function is enabled, you 

would need to enter the SSID manually on the wireless device 

to access the wireless network.

5.  Select any of these wireless mode options to determine the 

types of wireless devices that can connect to your wireless 

router:

•  Auto

: Select 

Auto

 to allow 802.11AC, 802.11n, 802.11g, and 

802.11b devices to connect to the wireless router.

•  Legacy

: Select 

Legacy 

to allow 802.11b/g/n devices to 

connect to the wireless router. Hardware that supports 

802.11n natively, however, will only run at a maximum speed 

of 54Mbps. 

•  N only

: Select 

N only

 to maximize wireless N performance. 

This setting prevents 802.11g and 802.11b devices from 

connecting to the wireless router.

6.  Select any of these channel bandwidth to accommodate higher 

transmission speeds:

40MHz:

 Select this bandwidth to maximize the wireless 

throughput.