Роботы-пылесосы Tefal X-plorer Serie 20 RG6871WH - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
• Your appliance stops during use:
- Your appliance may be overheating.
4
Stop the appliance and leave cool for at least 1 hour.
4
If it overheats on repeated occasions, contact the Approved Services Centre.
• The appliance stopped after the charge light was flashing:
- The appliance has run out of battery charge.
4
Recharge the vacuum cleaner.
• The power-brush is not working properly or makes a noise:
- The rotating brush or hose are obstructed.
4
Stop the vacuum cleaner and clean them.
- The brush is worn.
4
Contact an Approved Service Centre to change the brush.
- The belt is worn.
4
Contact an Approved Service Centre to change the belt.
• The power-brush stops during vacuuming:
- The safety function has been triggered.
4
Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an
obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.
• Your vacuum cleaner is not vacuuming as well, is making noise, whistling:
- The intake channel is partially blocked.
4
Unblock it
- The dust collector is full.
Empty it and clean it.
- The dust collector is not properly fitted.
4
Re-position it correctly.
- The intake head is clogged.
4
Remove the power-brush and clean it.
- The protective foam filter is saturated.
4
Clean it.
EN
Не крутится правое колесо. Сигнал и 3 раза моргает красным.