Роботы-пылесосы ROWENTA RR7747WH - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
According to model: *
Display
Description of the error
Possible cause/solution
1032
The robot is unable to locate its
docking station
The docking station is not connected to the mains.
Please connect the base to the mains.
The docking station is not easily accessible due to
the cluttered floor space.
Ensure the robot has easy access by clearing any
clutter around the docking station.
2001
The robot will turn off due to low
battery power
The battery power is weak and the robot is not
able to return to the docking system. Return the
robot manually to the docking station in order for
it to recharge.
2010
The robot is no longer positioned on
the ground
The robot is not at ground-level.
Please place the robot on the ground.
2020
One of the robot’s wheels is jammed
One of the wheels is jammed and is not working
properly.
Turn off the robot and remove the blocking
element.
2021
The vacuuming motor is jammed
The robot is unable to properly turn on. Call the
after-sales service centre, quoting error code 2021.
2022
The power-brush is jammed/blocked
The power-brush is not working correctly.
Turn off the robot and remove the blocking
element.
Remember to clean the power-brush using the
tool provided to remove hair.
2024
The robot is unable to find its route
The robot is blocked.
Move the robot, repositioning it in an uncluttered
space and re-start the vacuuming. Move the robot.
2025
The robot has a problem with its fall
sensors
The fall sensors are dirty. Clean the fall sensors
with the cloth provided.
The robot is jammed at the top of the stairs. Move
the robot.
2030
The robot’s dust collector is not
attached
The robot cannot start without its dust collector.
Attach the dust collector and its filter properly.
Place the dust collector and filter inside the
appliance.
2040
The robot’s navigation sensors are
damaged
The robot is unable to properly turn on. Call the
after-sales service centre, quoting error code 2040.
2041
The robot’s gyroscope is damaged
The robot is unable to properly turn on. Call the
after-sales service centre, quoting error code 2041.
2050
The robot faced an issue
Switch off and switch on the robot and put it back
on the docking station. After booting, the robot
will be ready for any command.
The robot does not turn on
The robot does not have sufficient battery power
to turn on.
Place the robot on the docking station; ensure
the ON/OFF switch under the robot is in the OFF
position.
Set the switch to the ON position.
EN
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
