Ecovacs DEEBOT OZMO 900 - Инструкция по эксплуатации - Страница 22

22

EN

No.

Malfunction

Possible Causes

Solutions

1

DEEBOT is not charging�

DEEBOT is not switched ON�

Switch ON DEEBOT�

DEEBOT has not connected to the Docking 

Station�

Be sure that the robot’s Charging Contacts have 

connected to the Docking Station Pins�

The battery is completely discharged�

Re-activate the battery�  Switch ON� Place DEEBOT on 

the Docking Station by hand, remove after charging for 3 

minutes, repeat 3 times; then charge normally�

2

DEEBOT cannot return to the 

Docking Station�

The Docking Station is not correctly placed�

Refer to Section 3�2 to correctly place the Docking Station�

3

DEEBOT gets stuck while 

working and stops�

DEEBOT is tangled with something on the floor 

(electrical wires, curtains, carpet fringing, etc.).

DEEBOT will try various ways to free itself�  If it is 

unsuccessful, manually remove the obstacles and restart�

4

DEEBOT returns to the Docking 

Station before it has finished 

cleaning�

When the battery gets low, DEEBOT 

automatically switches to Return to Charger 

Mode and returns to the Docking Station to 

recharge itself�

This is normal� No solution necessary�

Working time varies according to floor 

surface, room complexity and the Cleaning 

Mode selected�

This is normal� No solution necessary�

5. Troubleshooting