Bort BMW-12Li-FDK - Инструкция по эксплуатации - Страница 8

8

tools . Such preventive safety measures reduce the risk of 

starting the power tool accidentally .

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool . Power 

tools are dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation . 

If damaged, have the power tool repaired before use . 

Many accidents are caused by poorly maintained power 

tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in 

accordance with these instructions, taking into account 

the working conditions and the work to be performed . 

Use of the power tool for operations different from 

those intended could result in a hazardous situation .

Battery tool use and care

•  Recharge only with the charger specified by the manu-

facturer . A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another 

battery pack .

•  Use power tools only with specifically designated bat-

tery packs . Use of any other battery packs may create a 

risk of injury and fire .

•  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 

or other small metal objects, that can make a connec-

tion from one terminal to another . Shorting the battery 

terminals together may cause burns or a fire .

•  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact . If contact accidentally occurs, 

flush with water . If liquid contacts eyes, additionally seek 

medical help . Liquid ejected from the battery may cause 

irritation or burns .

Service

Have your power tool serviced by a qualified repair person 

using only identical replacement parts . This will ensure 

that the safety of the power tool is maintained .

SAFETY WARNINGS FOR MULTI-FUNCTION 

TOOLS

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord . Cutting 

accessory contacting a “live” wire may make exposed 

metal parts of the power tool “live” and could give the 

operator an electric shock .

•  Use the machine only for dry sanding . Penetration of 

water into the machine increases the risk of an electric 

shock .

•  Caution, fire hazard! Avoid overheating the object being 

sanded as well as the sander . Always empty the dust col-

lector before taking breaks . In unfavourable conditions, 

e .g ., when sparks emit from sanding metals, sanding de-

bris in the dust bag, micro filter or paper sack (or in the 

filter sack or filter of the vacuum cleaner) can self-ignite . 

Particularly when mixed with remainders of varnish, 

polyurethane or other chemical materials and when the 

sanding debris is hot after long periods of working .

•  Keep hands away from the sawing range . Do not reach 

under the workpiece . Contact with the saw blade can 

lead to injuries .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to 

fire and electric shock . Damaging a gas line can lead 

to explosion . Penetrating a water line causes property 

damage or may cause an electric shock .

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 

power tool is guided more secure with both hands .

•  Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 

by hand .

•  Wear protective gloves when changing application 

tools/accessories . Application tools/accessories become 

hot after prolonged usage .

•  Do not scrape wetted materials (e .g . wallpaper) or on 

moist surfaces . Penetration of water into the machine 

increases the risk of an electric shock .

•  Do not treat the surface to be worked with solvent-

containing fluids . Materials being warmed up by the 

scraping can cause toxic vapours to develop .

•  Use extreme caution when handling blades and scrap-

ers . The application tools are very sharp . Danger of 

injury .

SAFETY WARNINGS FO BATTERY TOOL

•  Use auxiliary handle(s), if supplied with the tool . Loss of 

control can cause personal injury .

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord . Cutting 

accessory contacting a “live” wire may make exposed 

metal parts of the power tool “live” and could give the 

operator an electric shock .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to 

fire and electric shock . Damaging a gas line can lead 

to explosion . Penetrating a water line causes property 

damage or may cause an electric shock .

•  Switch off the power tool immediately when the tool 

insert jams . Be prepared for high reaction torque that 

can cause kickback . The tool insert jams when: 

– the power tool is subject to overload 

– it becomes wedged in the workpiece .

•  Hold the machine with a firm grip . High reaction torque 

can briefly occur while driving in and loosening screws .

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 

power tool is guided more secure with both hands .

•  Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 

by hand .

•  Do not open the battery . Danger of short-circuiting .

•  Protect the battery against heat, e . g ., against continu-