Telefunken TF-1594U - Инструкция по эксплуатации - Страница 3

Instruction manual

3

Important safeguards

•

The instruction manual contains important

operating and maintenance instructions. For 
your safety, it is necessary to refer to the 
manual. Keep the manual for future use.

• Do not hit or drop the unit
• Do not

 e

xpose the unit to vibration, direct

sunlight, too high or low temperatures or 
humidity.

• Do not disassemble the unit yourselves

Refer servicing to qualified service personnel

All the illustrations in this manual are 

schematic images, which may differ from 
actual objects.

Power supply

Battery operation

• Insert 2 ААA batteries (not included)

to the terminals inside the battery 
compartment according to the polarity marks 
(+ and -). Your set will not work normally from 
the battery supply, but there is now the 
advantage that, in case of a mains current 
failure or power outage, your clock will 
continue to work. The clock display will not 
light up, the clock time and alarm setting will 
be held in the clock memory by the battery 
back-up system.

This enables you to move the set from place 

to place without re-setting the clock every time. 
The battery back-up system is only meant to 
be used for short-term power failures. For 
longer durations the batteries may become 
exhausted or there may be some deviation in 
accuracy.

•

When the batteries are exhausted, they

check that the voltage indicated on the rating 
label corresponds to the mains voltage in your 
location.

The time will start to flash.

General operations

Setting the time and date 

• Press and hold the CLOCK/MEM. button.

to increase the HOUR. You can press and hold 
the button to increase the number quickly.

• Press the HOUR/SKIP- button

to increase the MINUTES. You can press and hold 
the button to increase the number quickly.

• Press the MIN/SKIP+ button

CLOCK/MEM. button again to confirm.

• Once time is set correctly, press the

buttons to select the year. Press CLOCK/MEM.
to confirm.

• Next set the date. Press the SKIP+/SKIP- 

the levels of display backlight brightness (low, 
middle, high). The default is high.

Backlight brightness

• Press the DIM button to select between

should be removed from the set to prevent 
leakage. If you do not wish to take advantage 
of the battery back-up system, your set will 
work normally without batteries. However, if 
disconnected from the mains, the clock 
figures will flash when the mains are 
reconnected and you must re-set the clock.

DС operation

• The appliance is for household use only.
• Before the first connecting of the appliance

• Plug the supplied AC/DC power

adaptor into the DC adaptor input on the back 
of the unit. Connect the power cord to the AC 
household main outlet. Make sure the voltage 
is compatible.

• Always remember to disconnect

the  power  cord  from  the  main  supply  before 
disconnecting it from the unit.

and day. Press CLOCK/MEM. to confirm.

• Press the SKIP+/SKIP- to select the month

The unit will automatically exit the setting mode 
if no buttons are pressed for 5 seconds.

• The time and date are now set.