Радиоприемники Telefunken TF-1542 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
Instruction manual
5
Nap timer (countdown timer)
• During radio off mode, press the NAP button
to turn on the NAP mode, the NAP time will stay
for 5 seconds.
• Within 5 seconds press NAP button again to
change the duration from 90 min to 10 min.
• The alarm buzzer will sound for 30 min and
then shut off automatically. To stop the alarm
buzzer, press the ON/OFF button.
• Pressing the NAP button has no effect during
alarm operation. Press the ON/OFF button to
cancel the NAP function.
Laser projection
• This unit is equipped with a laser projector
showing the current time synchronized with the
main display.
• Press ON/OFF button to switch the
projector on. Adjust manually the position of
the projector unit to direct the laser beam on a
plain surface (ceiling, wall).
• Using FOCUS regulator, adjust the
projected image focus. Maximum projection
distance is 2.7 m.
• Press 180
0
FLIP button to flip the projected
image.
• Press and hold TEMP-TIME button
to select between the projection of time or
temperature.
Infrared sensor
• You can perform some functions with the
display of this unit by placing your hand over
the infrared sensor.
• In radio off mode, place your hand over
the sensor for 1 second; the display will show
the temperature. Place your hand again for 1
second; the display will show the current alarm
settings.
• In radio on mode, place your hand over
the sensor for 2 seconds; the unit will go to
sleep time setting mode.
• When the alarm is on, place your hand
Maintenance and care
Switch off the appliance, unplug from the
power supply. The outside of the appliance can
be cleaned with a slightly damp cloth.
Accessories
Receiver
1 pc
Instruction manual
1 pc
Warranty card
1 pc
Consumer information
1 pc
over the sensor for 1 second to interrupt the
signal for 9 minutes (snooze function).
• In radio off mode, when the display is
switched to AUTO OFF, place your hand over
the sensor for 1 second; the display will switch
on.
• In radio on mode, place your hand over
the sensor for 1 second; the display will show
the temperature. Place your hand again for 1
second; the display will show the current radio
frequency.
