Ritmix RRC-1004 - Инструкция по эксплуатации - Страница 2

Радиоприемники Ritmix RRC-1004 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 2
Загружаем инструкцию
background image

DESCRIPTION

1. Snooze button
2. Alarm set button
3. Time set button
4. Sleep set button
5. Hour set button
6. Minute set button
7. On/Off/Auto/Alarm selector
8. Tuning control
9. Volume control
10. FM antenna
11. Auto indicator
12. Main plug (AC cord)
13. Alarm off button
14. AM/FM selector
15. Battery back-up
16. Display

SAFETY MANUAL

Lightning mark

The lightning flash

within the triangle

is a warning sign

alerting you of

“dangerous voltage”

 inside the product

CAUTION

Risk of electric shock!

DO NOT OPEN

Exclamation mark

The exclamation point

within the triangle is a

warning sign alerting 

you  

of important 

instructions

accompanying the 

product

1. Study the manual. It’s necessary to study all the points of safety manual. 
2. Keep the safety of manual for future use. 
3. Check whether the electricity supply in the sockets corresponds to the voltage of the unit. 
4. Do not use the unit near water such us bathtub, wash bowl, kitchen sink, laundry tub or wet 
basement. 
5. Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. 
6. For additional safety during lighting, switch off the unit from the plug.  
7. In case you are not going to use the unit for along time, remove the batteries to avoid their 
leakage. 
8. Do not remove the cover of the unit yourself. Technical maintenance should be performed only by 
qualified service personnel.  
9. Keep the unit away from heat sources, such as heat registers, radiators, stoves etc. 

POWER OPERATION

Battery operation

• Insert 1x9В battery into battery compartment; preferably to use long-life batteries. In case of 
temporary power failure, the battery will store time settings, even if time will not be shown on 
display. 
Note: The affectivity of this feature totally depends on battery charge.  Otherwise if the battery is old 
or of bad quality, the unit will not show correct time. 

AC operation
• Before the connection of the unit, check that voltage indicated in the list of technical characteristics 
corresponds to mains voltage in your home.

Clock Setting

Set button On/Off/Auto/Alarm Switch (7)  to Off. Connect the Mains Lead to the power supply. 
The clock display will flash on and off indicating a power interruption and that the display time is 
incorrect.. 
To set the correct time, press the Time Set Button(3) and Minute Set Button (6), or Hour     
Set Button (5), together, until the correct time is displayed.
Note: Open the Clock Battery Compartment door and fit a PP3 (or equivalent) 9V battery. The 
purpose of this battery is to store the information relating to alarm time, and to keep the clock 
functioning in the event of disconnection from the mains supply or power interruption. Should this 
occur, the clock will continue to keep time, but will not display.

Alarm Setting

To set the alarm time, press the Alarm Set Button (2) and Minute Set Button (6), or Hour Set Button 
(5), together, until the required alarm time is displayed. 
Switch the On/Off/Auto/Alarm Switch (7) to either ‘AUTO’ or ‘ALARM’ position for choice of wake by 
radio or wake by buzzer respectively. The Auto Indicator (11) will illuminate and alarm is now set to 
activate at the required time.
The alarm can be temporarily stopped for 9 minutes by pressing the Snooze/Sleep Off Button (1). 
This can be repeated until press the Alarm Button (2).
The alarm will activate again after 24 hours unless the On/Off/Auto/Alarm Switch (7) is set to ‘OFF’.
Note: When setting alarm time always remember to release the Minute Set or Hour Set or Hour Set 
Button before releasing the Alarm Set Button to ensure that the real time will not be affected

Sleep Setting

Set the On/Off/Auto/Alarm Switch (7) to ‘OFF’, ‘AUTO’ or ‘ALARM’ position.

Press the Sleep Set Button (4) and Minute Set Button (6) together. The sleep time will be displayed 
and count down from 59 minutes to zero. Release the button when the required sleep time is 
displayed.
The radio will now operate until the sleep time has elapsed or may be switched off by pressing the 
Snooze Off Button (1).

Radio Setting

The FM band required the use of the FM aerial wire, this should be uncoiled and positioned for best 
reception. Set the On/Off/Auto/Alarm Switch (7) to ‘ON’ position.
Adjust the Tuning Control (8) to select the desired station.
Adjust the Volume Control (9) as required. 
To turn off the radio, set the On/Off/Auto/Alarm Switch (7) to ‘OFF’. If the radio does not switch off 
this may be caused by inadvertent operation of the Sleep Set Button (4). To cancel this presses the 
Snooze/Sleep Off  Button (1) once. 
Adjust the Switch (14) to the required waveband.

Clean and Care

Clean the cabinet with a soft cloth moistened with water or mild detergent. Do not use solvents such 
as alcohol, benzene or thinner, as the may damage the cabinet finish. Make sure to disconnect the 
mains lead from the supply before cleaning. Please retain these instructions for future reference.

Technical Characteristics

 

Frequency range:    AM 530-1600 KHz 

                                                 FM 64-108 MHz
                  Power source:         AC 220V, 50Hz
                                                 DC 9V
                  Power output:         300mW
                  Stabilizer:               Quarts 
                  Display:                  0,9” 

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Ritmix RRC-1004?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"