Радиоприемники Hyundai Electronics H-1613 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
·
Automatic searching station mode is fit to search strong signal station.
·
In the course of automatic searching, if the digit on the display screen varies slowly, it means that there is weak signal station nearby, you can change to
use manual to search station.
Frequency Change Law
·
Receiving FM, press the up tuning or down tuning button once, the frequency increases or decreases 0.1 MHz.
·
Receiving SW, press the up tuning or down tuning button once, the frequency increases or decreases 0.005 MHz.
·
Receiving MW, press the up tuning or down tuning button once, the frequency increases or decreases 9 KHz.
Store Scan
In receiving state, press the store scan/Alarm ON button once, it will begin to scan station, in the course of searching, when there is a station, it
will store it automatically, and then hold on. In the course of automatic scanning, press the store scan/Alarm ON button once again, it will
discontinue scan.
Attention:
·
In the course of automatic scanning, if not clear, please change to use manual to search station.
·
When using the store scan function, the old frequency will be covered with the new station
Store Stations
·
You can use one of the methods of auto, manual and direct input station to receive station frequency.
·
Press the store station button, the "PRESS" is flashing on the display screen.
·
Press the Memory + or the Memory -to within 5 seconds to select stored address. Press the store stations button again to confirm the stored
address, the station frequency has been stored in the address.
Attention:
You can store 10 stations in each band. If in 1-10 address the station frequency already exists, store new frequency according to the above-
mentioned methods, the old frequency will be cancelled.
Using Stored Stations
In receiving state, press the Band Change-over/Mode button to select band, press the Memory + or the Memory - button to select the station
which is saved in the memory.
Lock Switch
The button lock switch is set in the radio to avoid mis-operation. Before to the use, please check the lock function.
After selecting the station or turning off the radio, please press the lock switch, the "
" will display, the buttons on the surface do not
function.
Earphones Socket
For private listening please insert the earphones in the Earphone socket (the speaker inside the radio disconnects automatically), you can listen to the radio by
earphones.
