BRAYER 4201BR - Инструкция по эксплуатации - Страница 9

9

EN

USING  THE ATTACHMENTS
Floor/carpet brush (15)

When using the brush (15) set the switch (16) to the 

necessary «FLOOR/CARPET» position (pic. 2).

Combined crevice nozzle (14)

The combined crevice nozzle (14) can be used for 

cleaning radiators, crevices or spaces between 

cushions, as well as for collecting dust from furniture 

surface. The pile on the brush prevents damage of 

polished furniture surfaces. While cleaning, set the 

brush to the required position.

ASSEMBLING THE VACUUM CLEANER

Attaching and removing the flexible hose (19)

• 

Insert the flexible hose (29) ending (23) into the air 

inlet (24) until the locks (22) catch.

• 

To remove the flexible hose (29), press the locks (22) 

and detach the ending (23) from the air inlet (24) 

(pic.3).

Attaching the telescopic pipe (18) and the 

attachments

•  Attach the telescopic extension pipe (18) to the 

flexible hose handle (20) (pic. 4).

•  Extend the lower part of the telescopic extension 

pipe (18) to the required length, having preliminarily 

pressed the lock (17) (pic. 5).

• 

Choose the necessary attachment: floor/carpet brush 

(15), combined crevice nozzle (14) and attach it to 

the telescopic extension pipe (18).

•  You can attach the combined crevice nozzle (14) to 

the flexible hose handle (20).

ATTENTION!

•  Do not use the vacuum cleaner in places where 

aerosols are used or sprayed and in proximity to 

highly inflammable liquids, do not use the vacuum 

cleaner in the places where such liquids are stored.

•  The vacuum cleaner is not intended for collecting 

water or any other liquids; do not use it for collecting 

burning or smoking cigarettes or cinders.

•  Do not use the vacuum cleaner for collecting dust of 

plaster, concrete, flour or ashes.

• 

Take sharp objects away from the floor before 

cleaning to prevent damage to the unit.

•  If the suction power of the vacuum cleaner decreases 

rapidly while cleaning, switch it off immediately, 

unplug it and check the telescopic pipe (18) or 

the flexible hose 19) for obstruction. Remove the 

obstruction, after that you can resume cleaning.

USING THE VACUUM CLEANER

The dust bin (13) is equipped with the cyclonic filter (27) 

which sieves out garbage and dust from the ingoing air, 

and the inlet HEPA (11) filter fully retains the finest dust 

particles.