BLACK-DECKER ADV1200-XK - Инструкция по эксплуатации - Страница 6

6

ENGLISH

1. On/off switch
2.  Bowl release button
3. Dust bowl
4. Nozzle
5.  12V car connector

Fig. A

6.  Large brush head
7.  Large crevice tool
8. Flexible hose

Assembly

Accessories (

fi

 g. A)

These models may be supplied with some of the 
following accessories:

♦

  Large brush head (6)

♦

  Large crevice tool (7)

♦

  Flexible hose (8)

Fitting the accessories (Fig. A)

♦

  Fit the appropriate accessory on to the short 

end of the 

fl

 exible hose (8). Make sure that the 

accessory is pushed fully on.

♦

  Fit the long end of the 

fl

 exible hose (8) into 

the front of the appliance. Make sure that the 

fl

 exible hose is pushed fully in.

Use

Connecting to the vehicle’s power supply

♦

  Make sure that the appliance is switched off.

♦

  Remove the cigarette lighter from it’s socket.

♦

  Plug the 12V car connector (5) into the 

cigarette lighter socket.

Switching on and off (

fi

 g. B)

♦

  To switch the appliance on, slide the on/off 

switch (1) forward to position 1.

♦

  To switch the appliance off, slide the on/off 

switch (1) back to position 0.

Optimising the suction force

In order to keep the suction force optimised, the 

fi

 lters must be cleared regularly during use.

Emptying and cleaning the product.

Quick empty the dust bowl (

fi

 g. C)

♦

  Press the release latches (9) and pull the 

nozzle (4) straight off.

♦

  Empty the contents of the bowl.

♦

  To replace the nozzle, place it back onto the 

handle until it “clicks” 

fi

 rmly into position.

Removing the dust bowl and 

fi

 lters (

fi

 g. D)

Warning! 

The 

fi

 lters are re-usable and should be 

cleaned regularly.

♦

  Press the release latch (2) and pull the dust 

bowl (3) straight off.

♦

  While holding the dust bowl over a bin, pull out 

the 

fi

 lter to empty the contents of the bowl.

♦

  To replace the dust bowl, place it back onto the 

handle until it “clicks” 

fi

 rmly into position.

Warning! 

Never use the appliance without 

the 

fi

 lters. Optimum dust collection will only be 

achieved with clean 

fi

 lters.

Pre-

fi

 lter (

fi

 g. E)

The Filter and pre-

fi

 lter can be separated to allow 

better cleaning.

♦

  Twist the pre-

fi

 lter (10) in a clockwise direction 

and lift from the 

fi

 lter (11).

Cleaning the dust bowls and 

fi

 lters

♦

  The dust bowls and 

fi

 lters can be washed in 

warm soapy water.

♦

  Make sure that the 

fi

 lters and the dust bowl are 

dry before re-

fi

 tting.

Replacing the 

fi

 lters

The 

fi

 lters should be replaced every 6 to 9 months 

and whenever worn or damaged.
Replacement 

fi

 lters are available from your 

BLACK+DECKER dealer:
For models: ADV1200 use 

fi

 lter part number 

VF110FC-XJ 

Maintenance

Your BLACK+DECKER corded/cordless appliance/
tool has been designed to operate over a long 
period of time with a minimum of maintenance. 
Continuous satisfactory operation depends upon 
proper tool care and regular cleaning.

Warning! 

Before performing any maintenance on 

corded/ cordless power tools:

♦

  Switch off and unplug the appliance/tool.

Protecting the environment

Separate collection. This product must 
not be disposed of with normal household 
waste.

Should you 

fi

 nd one day that your 

BLACK+DECKER product needs replacement, or 
if it is of no further use to you, do not dispose of it 
with household waste. Make this product available 
for separate collection.