VITEK VT-8137 - Инструкция по эксплуатации - Страница 4

Пылесос VITEK VT-8137 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 28
Загружаем инструкцию
background image

4

 ENGLISH

 •

Use  only  the  accessories  and  attachments 
supplied.

 •

Clean the vacuum cleaner regularly.

 •

Keep the vacuum cleaner in a dry cool place.

 •

Do not use the vacuum cleaner to clean pets.

 •

Close supervision is necessary when children 
or  people  with  disabilities  are  near  the  oper-
ating unit.

 •

This unit is not intended for usage by children. 
During the unit operation and breaks between 
operation  cycles  place  the  unit  out  of  reach 
of children.

 •

The  unit  is  not  intended  for  usage  by  physi-
cally  or  mentally  disabled  persons  (including 
children) or by persons lacking experience or 
knowledge if they are not under supervision of 
a person who is responsible for their safety or 
if they are not instructed by this person on the 
usage of the unit.

 •

Do  not  leave  children  unattended  to  prevent 
using the unit as a toy.

 •

For children safety reasons do not leave poly-
ethylene bags used as packaging unattended.

Attention!  Do  not  allow  children  to  play  with 
polyethylene  bags  or  packaging  film.  Danger  
of suffocation!

 •

Regularly  check  the  power  plug  and  power 
cord integrity for damages.

 •

Do  not  use  the  unit  if  the  power  cord  or  the 
power  plug  is  damaged.  If  the  power  cord  is 
damaged, it should be replaced by the manu-
facturer, service or similar qualified personnel 
to avoid danger.

 •

Do  not  attempt  to  repair  the  unit  by  yourself. 
Do  not  disassemble  the  unit  by  yourself,  if 
any  malfunction  is  detected  or  after  it  was 
dropped,  unplug  the  unit  and  contact  any 
authorized  service  center  from  the  contact 
address  list  given  in  the  warranty  certificate 
and on the website www.vitek.ru.

 •

Transport the unit in the original packaging only.

 •

Keep  the  unit  out  of  reach  of  children  and 
people with disabilities.

THE UNIT IS INTENDED FOR HOUSE HOLD USE 
ONLY,  ITS  COMMERCIAL  USAGE  AND  USAGE 
IN PRODUCTION AREAS AND WORK SPACES IS 
PROHIBITED.

BEFORE THE FIRST USE

After  unit  transportation  or  storage  at  low 
temperature  keep  it  for  at  least  three  hours 
at room temperature before switching on.

– 

Unpack  the  unit  completely  and  remove  any 
advertising  stickers  that  can  prevent  the  unit 
operation.

– 

Check  the  unit  for  damages,  do  not  use  it  in 
case of damages.

– 

Before  switching  the  unit  on,  make  sure  that 
your home mains voltage corresponds to the 
unit operating voltage.

ASSEMBLING THE VACUUM CLEANER
Attaching and removing the flexible hose

 •

Insert the flexible hose ending (8) into the air 
inlet (10) until the locks (9) click.

 •

To  remove  the  flexible  hose  (7),  press  the 
clamps  (9)  and  detach  the  ending  (8)  from 
the air inlet (10).

Attaching the telescopic pipe  
and the attachments

 •

Attach the telescopic extension pipe (4) to the 
flexible hose handle (5) (pic. 1).

 •

Extend the lower part of the telescopic exten-
sion  pipe  to  the  required  length,  having  pre-
liminary pressed the clamp (3).

 •

Choose the necessary attachment - floor/car-
pet brush (1), combined crevice nozzle (27) or 
furniture brush (29) – and attach it to the tele-
scopic extension pipe (4) (pic. 2).

 •

If  necessary,  you  can  attach  the  attach-
ments (27,  28)  directly  to  the  flexible  hose 
handle (5).

USING THE BRUSH AT TACHMENTS
Floor/carpet brush (1)

Set the switch (2) on the brush (1) to the required 
position  «FLOOR/CARPET»  (depending  on  the 
type of the surface being cleaned).

Combined crevice nozzle (27)

The  combined  attachment  is  intended  not  only 
for  cleaning  radiators,  crevices,  corners  or  space 
between cushions, but for collecting dust from fur-
niture surface as well, the pile on the brush (27) pre-
vents damage of polished furniture surface. During 
the operation set the brush to the required position.

Furniture brush (28)

The brush attachment (28) is intended for clean-
ing fabric surfaces of upholstered furniture.

Dust bin (11)

The dust bin (11) is equipped with the cyclonic fil-
ter (19) which eliminates garbage and dust from 

IM VT-8137.indd   4

31.01.2019   16:49:37

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-8137?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"