VITEK VT-8120 - Инструкция по эксплуатации - Страница 4

Пылесос VITEK VT-8120 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 32
Загружаем инструкцию
background image

4

 ENGLISH

 

Use  only  the  accessories  and  attachments 
supplied.

 

Clean the vacuum cleaner regularly.

 

Do not use the vacuum cleaner to clean pets.

 

Close  supervision  is  necessary  when  chil-
dren  or  disabled  persons  are  near  the  oper-
ating unit.

 

This unit is not intended for usage by children. 
During the operation and breaks between the 
operation  cycles,  keep  the  unit  away  from 
children.

 

The  unit  is  not  intended  for  usage  by  physi-
cally  or  mentally  disabled  persons  (including 
children) or by persons lacking experience or 
knowledge if they are not under supervision of 
a person who is responsible for their safety or 
if they are not instructed by this person on the 
usage of the unit.

 

Do  not  leave  children  unattended  to  prevent 
using the unit as a toy.

 

For  children  safety  reasons  do  not  leave  poly-
ethylene bags, used as packaging, unattended.

Attention! 

Do  not  allow  children  to  play  with 

polyethylene bags or packaging film. 

Danger of 

suffocation!

 

Regularly  check  the  power  plug  and  power 
cord for damages.

 

Never  use  the  unit  if  the  power  cord  or  the 
plug is damaged, if the unit works improperly 
or after it was dropped.

 

Do not repair the unit by yourself. Do not dis-
assemble  the  unit  by  yourself,  if  any  mal-
function  is  detected  or  after  it  was  dropped, 
unplug  the  unit  and  apply  to  any  authorized 
service  center  at  the  contact  address  list, 
given  in  the  warranty  certificate  and  on  the 
website www.vitek.ru.

 

Transport the unit in the original package only.

 

Keep the unit out of reach of children and dis-
abled persons.

THE  UNIT  IS  INTENDED  FOR  HOUSEHOLD  USE 
ONLY,  ITS  COMMERCIAL  USAGE    AND  USAGE 
IN PRODUCTION AREAS AND WORK SPACES IS 
PROHIBITED.

ASSEMBLING THE VACUUM CLEANER

After  unit  transportation  or  storage  at  low 
temperature, keep it for at least three hours 
at room temperature.

– 

Unpack  the  unit  completely  and  remove  any 
package  materials  and  advertising  stickers 
that prevent the unit operation.

– 

Check the unit for damages; in case of dam-
ages do not use the unit.

– 

Before  switching  the  unit  on,  make  sure  that 
your home mains voltage corresponds to the 
unit operating voltage.

Note: 

-  before  replacing  the  brush  (1),  set-

ting  the  attachment  (25)  or  cleaning  the  dust 
bin  (11)  switch  the  vacuum  cleaner  off  and  take 
the power plug out of the mains socket.

Attaching and removing the flexible hose

 

Insert the flexible hose ending (8) into the air 
inlet  (10)  and  turn  it  clockwise  until  bumping 
(pic. 2).

 

To remove the flexible hose (7) turn the end-
ing  (8)  counterclockwise  and  remove  it  from 
the air inlet (10).

Attaching the telescopic pipe  
and the attachments

 

Attach the telescopic extension pipe (4) to the 
flexible hose handle (5) (pic. 2).

 

Extend the lower part of the telescopic exten-
sion  pipe  to  the  required  length,  having  pre-
liminarily pressed the lock (3).

 

Choose  the  necessary  attachment  –  floor/
carpet  brush  (1)  or  combined  attach-
ment  (25)  –  and  attach  it  to  the  telescopic 
extension pipe (4) (pic. 3).

 

If  necessary,  you  can  attach  the  attach-
ment  (25)  directly  to  the  flexible    hose  han-
dle (5).

USING THE BRUSH AT TACHMENTS
Floor/carpet brush (1)

Set the switch (2) on the brush (1) to the required 
position  «FLOOR/CARPET»  (depending  on  the 
type of the surface being cleaned).

Combined attachment (25)

The crevice nozzle is intended for cleaning radi-
ators,  crevices,  corners  and  space  between 
cushions  and  for  collecting  dust  from  furniture 
surface as well,  the pile on the brush (25) pre-
vents  the  damage  of  polished  furniture  sur-
face.  During  the  operation  set  the  brush  to  the 
required position.

Dust bin (11)

The  dust  bin  (11)  is  equipped  with  the  cyclonic 
filter  which  eliminates  garbage  and  dust  from 
the air, and the HEPA filter (19) retains the finest 
dust particles.

IM VT-8120.indd   4

05.03.2018   12:58:49

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-8120?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"