Пылесос VITEK VT-8114 GD - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
ENGLISH
•
Do not immerse the unit body into water or
other liquids.
•
Use only the accessories and attachments
supplied.
•
Clean the vacuum cleaner regularly.
•
Keep the vacuum cleaner in a dry cool place.
•
Do not use the vacuum cleaner to clean pets.
•
Close supervision is necessary when chil-
dren or disabled persons are near the oper-
ating unit.
•
This unit is not intended for usage by children.
During the unit operation and breaks between
operation cycles, place the unit out of reach
of children.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision
of a person who is responsible for their safety
or if they are not instructed by this person on
the usage of the unit.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as a packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
Transport the unit in the original package only.
•
Regularly check the power plug and power
cord integrity for damages.
•
Never use the unit if the power cord or the
power plug is damaged, if the unit works
improperly or after it was dropped.
•
Do not repair the unit by yourself. Do not dis-
assemble the unit by yourself, if any mal-
function is detected or after it was dropped,
unplug the unit and apply to any authorized
service center from the contact address list
given in the warranty certificate and on the
website www.vitek.ru.
•
Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
ASSEMBLING THE VACUUM CLEANER
After unit transportation or storage at low
temperature, keep it for at least three
hours at room temperature before switch-
ing on.
–
Unpack the unit completely and remove any
stickers that can prevent unit operation.
–
Check the unit for damages; do not use it in
case of damages.
–
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
Note: Always switch the vacuum cleaner off and
take the power plug out of the socket before
replacing the brush attachments, cleaning or
replacing the dustbag (20).
Attaching and removing the flexible hose
•
Insert the flexible hose ending (
8
) into the air
inlet (
10
).
•
Insert the hose with a slight effort until locking.
•
If you need to remove the flexible hose, press
the locks (
9
) and detach the hose.
Attaching the telescopic pipe
and the attachments
• Attach the telescopic extension pipe (
4
) to
the flexible hose handle (
5
).
• Extend the lower part of the telescopic
extension pipe to the required length, having
preliminarily pressed the lock (
3
).
• Choose the necessary attachment – floor/
carpet brush (
1
) or combined crevice nozzle
brush (27) – and attach it to the telescopic
extension pipe (
4
).
USING OF THE BRUSH AT TACHMENTS
Floor/carpet UltraClean brush (1)
Set the switch (
2
) on the brush (
1
) to the required
position (depending on the type of the surface
being cleaned).
Combined crevice nozzle brush (27)
The crevice nozzle brush (27) is intended not
only for cleaning radiators, crevices, corners or
space between cushions, but for collecting dust
from furniture surface as well, the pile on the
brush (27) prevents damage of polished furni-
ture surface.
Using the dustbag (20)
2 cloth dustbags (
20
) with a convenient plastic
clamp are supplied with the unit.
•
Open the dustbag compartment lid (
13
) by
pressing the lid lock (
12
).
•
Take the dustbag holder (
18
) and pull it to
remove the dustbag holder (
18
) and the dust-
bag (
20
) from the locks (
19
).
IM VT-8114.indd 4
28.07.2016 10:28:38
