Пылесос VITEK VT-1802 R - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
For cleaning upholstery, mattresses, clothes, carseats etc., it is advisable to use
the upholstery nozzle.
Crevice tool.
Fig.2-D
The crevice tool is ideally suited for cleaning grooves, folds, pockets and other
places which are difficult to reach.
OPERATION
When you have selected the appropriate attachments and connected them to
the vacuum cleaner:
- pull out the required length of supply cord.
- plug into the mains electrical supply.
- switch on the appliance by pressure to the foot switch marked.
Electronic suction control (PSV9981/PSV9961)
The suction power of the appliance can be set with the aid of the electronic suc-
tion control. Using this you can vary the suction power from low for upholstery,
curtains and delicate fabrics to full power for carpets.
The motor power, and with it the suction power can be infinitely varied as
required by moving the slide.
Mechanical suction control.
Fig.3
An air regulator is incorporated in the handle of the suction hose.
The suction power can be varied by moving the slide up and down, this is espe-
cially useful in situations when the suction power is too strong, e.g. when the
carpet is lifted up and sucked into the nozzle.
DUST-BAG, FILTERS AND CHANGING THE FILTERS
Filters
The filter Plus Compact range is equipped with a filtration system consisting of:
- 1 double-wall paper dust-bag.
- 1 motor protection filter(air inlet)
- 1 Micro Filter Plus to trap dust particles(air outlet).
These filters must be replaced at regular intervals in order to ensure troublefree
operation of the vacuum cleaner.
Open the dust container by pressing the release catch and lift the cover.
Paper dust-bag
Bag -full indicator
The bag full indicator lets you know that the dustbag should be changed or that
there is a blockage in the suction paths.
Changing the dust-bag
Unplug the cleaner from the mains electrical supply.
Change the dust-bag if the bag - full indicator is fully red when the nozzle is :lift-
ENGLISH
10
i 1802.qxd 25.05.04 13:02 Page 10
