Пылесос Thomas LORELEA XT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

Cleaning easily-scratched floors
Fit the hard floor wiper attachment.
Remove the hard floor adapter that was previously attached by pressing
the unlock button on the floor spray nozzle.
Put in the the hard floor wiper attachment in the same way and push
it down.
Lock the hard floor wiper attachment by pushing the slider.
Then attach the microfibre pad to the Velcro strip on the bottom of the
hard floor wiper attachment.
Wipe the floor.
To do this, press the lever of the stop valve on the handle to dampen
the microfibre pad and move the wiper attachment from front to back
over the surface to be cleaned.
Cleaning carpets
Pull back the hard floor adapter.
To do this, you may have to take off the hard floor wiper attachment.
Put on the hard floor adapter but do not lock it with the slider. Pull back
the hard floor adapter until you hear it latch into place.
Perform cleaning.
To do this, press the lever of the stop valve on the handle and move the
spray nozzle from front to back over the surface to be cleaned.
Follow the instructions under “Options for use”.
After finishing spray extraction cleaning, rinse out the pump and
the spray tubes with clean water. To do this, fill the cleaning
solution tank with approximately 0.2 litres of clean water and
spray it into a wash basin or similar receptacle.
GB
Spray extraction (shampooing)
27
THOMAS LORELEA XT
THOMAS LORELEA XT
»click«