LG VC20261HQ - Инструкция по эксплуатации - Страница 10

Connecting the flexible hose

Push the end of the head 

(1)

on the flexible hose

(2)

into the attachment point on the vacuum cleaner.

To remove the flexible hose from the vacuum

cleaner, press on the button 

(3)

situated on the

head, then pull upwards.

Assembling the tubes

(depending on model)

• Metal tube (4,5)

- Fit together the two tubes by twisting slightly.

• Telescopic tube (6)

- Push spring latch 

(7).

- Pull out tube to required length.

- Release spring latch to lock.

Using the cleaning head and Accessory

Nozzles

(depending on model)

Fit the large cleaning head onto the end of the tube.

• The 2 position head (10)

is equipped with

a pedal 

(11)

which allows you to alter its

position according to the type of floor to be

cleaned. 

Hard floor position 

(tiles, parquet

floors...): Press on the pedal to lower the

brush.

Carpet or rug position:

Press on

the pedal to lift the brush up.

• Crevice Tool (14)

For vacuuming in those normally inaccess-

ible places i.e. reaching cobwebs, or down

the side of a sofa!

• Upholstery Nozzle (15)

For vacuuming upholstery, mattresses, etc. The

thread collectors help to pick up the threads and fluff.

• Dusting brush (16)

For vacuuming picture frames furniture

outlines, books and other uneven objects.

• 

Accessory Holder 

can be attached on the

Extention wands using clamping hook.

Accessories can be stored in the holder 

(30)

. 

• 

Bent tube (34) 

The Bent tube is used to clean easily under

sofa, table and bed. 

Connect the bent tube to the hose and connect

the telescopic tube to the bent tube (You can

also connect the telescopic tube to the hose

without bent tube) 

If you draw the latch lock, the bent tube is

curved. If you stretch the bent tube, it returns to

its original position.

E

How to Use  

How to plug in and use

Pull out the mains lead to the desired length

and plug into the socket.

Press button 

(17)

to start the vacuum cleaner.

To stop it press the button

(17)

again.

Adjusting the power level

(depending on model)

• Suction capacity increases steplessly up

to MAX.

(19)

• The flexible hose handle 

(20)

has a

manual air flow regulator 

(21)

which

allows you to briefly reduce the suction level.

Carrying and storage

When you have switched off and unplugged

the appliance, press on the button 

(18)

to

automatically rewind the cord.

• Use stowage clip as shown when storing

the cleaner 

(22).

Changing the dust bag

The dustbag needs changing when the cleaner

is set to maximum power and the cleaner head

is off the floor but the “bag full” indicator

window 

(23)

is completely coloured red.

Even if the dustbag does not appear to be

full at this stage, it should be changed.

It could be that a great deal of very fine dust

has clogged up the pores of the dust bag.

• Turn off the appliance and unplug it.

• Remove hose.

• Open the cover 

(24)

Your appliance is equipped with either a

paper dust bag or a fabric dust bag 

(28)

(depending on model)

• Push the lever forwards in the direction of

the arrow 

(26)

, and pull off the full paper

filter bag towards the rear. Remove the

bag and throw it away.

• Insert the new paper filter bag into the unit

with the arrow pointing downwards 

(27).

- 9 -