LG V-C3248 NT - Инструкция по эксплуатации - Страница 6

– 5 –

E

Changing the dust bag

The dustbag needs changing when the cleaner
is set to maximum power and the cleaner head
is off the floor but the “bag full” indicator win-
dow(17) is completely coloured red.
Even if the dustbag does not appear to be
full at this stage, it should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.

• Turn off the appliance and unplug it.

• Open the cover by pressing the hook(18)

and lifting it up until it snaps into place.

Your appliance is equipped with either a
paper dust bag (19) or a fabric dust bag
(21)(depending on model).
• Take hold of the dust bag by the handle

a n d   p u l l . R e m o v e   t h e   b a g   a n d   t h r o w   i t
away.

• To refit a new bag push the cardboard

support of a new bag into the bag mount
(20)until it will go no furthe

r.

If your appliance is fitted with a fab-
ric dust bag

follow the same instructions

as above.
Empty it and replace it(21). 
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not fit-
ted correctly.

Cleaning the motor filter

The motor filter is situated inside the appli-
ance between the dust bag and the motor.
Each time that you change the air outlet fil-
ter we advise you to remove the motor fil-
ter(22) and to clean it by tapping to remover
the dirt and then replacing it in the vacuum
cleaner.

■ 

The working life of this set is 7 years since
t h e   d a t e   o f   d e l i v e r y   t o   t h e   c o n s u m e r .
U p o n   t h e   e x p i r y   o f   t h e   s a i d   p e r i o d ,   i t
might be unsuitable for the use according
to their destination.

Check that the appliance is correctly plugged
in and that the electrical socket is working.

• Stop the appliance and unplug it.

• Check that the tubes, flexible hose and

cleaning tool are not blocked.

• Check that the dust bag is not full.Replace

if necessary.

What to do if your appliance
does not work?

What to do when the suction
performance reduces?