Philips FC9162 - Инструкция по эксплуатации - Страница 13

troubleshooting 

This chapter summarises the most common problems you could encounter with the appliance.  

If you are unable to solve the problem with the information below, contact the Consumer Care 

Centre in your countr y. 

 1 

 The suction power is insufficient.

A  The dustbag may be full.

 - Empty the reusable dustbag (specific types only) or replace the paper dustbag.

B  The filters may be dir ty. 

 - Clean or replace the filters.

C  The suction power may be set to a low setting.

 - Set the suction power to a higher setting.

D  The nozzle, tube or hose may be blocked up. 

 - To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible) 

the other way around. Switch on the vacuum cleaner to force the air through the blocked-up 

item in opposite direction (Fig. 45).

 2 

 The infrared remote control (specific types only) does not function.

A  Perhaps the batteries do not make proper contact or have not been inser ted in the proper way.

 - Remove the lid of the batter y compar tment and push the batteries back into place. Make sure 

that the - and + poles point in the right direction (Fig. 23).

B  The batteries may be empty.

 - Replace the batteries.

 3 

 When I use my vacuum cleaner I sometimes feel electric shocks.

A  Your vacuum cleaner builds up static electricity. The lower the air humidity in the rooms, the 

more static electricity the appliance builds up.

 - To reduce this inconvenience, we advise you to discharge the appliance by frequently holding 

the tube against other metal objects in the room (for example legs of a table or chair, a radiator 

etc.).

 - To reduce this inconvenience, we advise you to raise the air humidity level in the room by 

placing water in the room. For example, you can hang containers filled with water from your 

radiators or place bowls filled with water on or near your radiators.

English

13