Пылесос Philips FC8451 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Accessory holder (speciic types only)
1
To store accessories in the accessory holder, push them onto the holder (Fig. 7).
Mini turbo brush (speciic types only)
The mini turbo brush is specially designed for effectively picking up animal hairs and luff from
furniture and mattresses.
Crevice nozzle and small nozzle (speciic types only)
-
Use the crevice nozzle to clean narrow corners or hard-to-reach places.
-
Use the small nozzle to clean small areas, e.g. the seats of chairs and sofas.
Using the appliance
Vacuum cleaning
1
Pull the cord out of the appliance and insert the mains plug into the wall socket.
2
Press the on/off button on top of the appliance with your foot to switch on
the appliance (Fig. 8).
Note: If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park the
tube in a convenient position (Fig. 9).
Adjusting suction power
-
You can adjust the suction power with the electronic suction power control on the vacuum
cleaner (Fig. 10).
Cleaning and maintenance
The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
1
Clean the appliance and its parts with a damp cloth.
Do not clean any part of the vacuum cleaner in the dishwasher.
Cleaning the motor protection ilter
To maintain optimal performance, clean the motor protection ilter at least once a year.
1
Pull the cover upwards to open it (Fig. 11).
2
Lift the dustbag out of the appliance (Fig. 12).
3
Pull the ilter holder with the motor protection ilter out of the appliance (Fig. 13).
4
Take the motor protection ilter out of the holder and shake the motor protection ilter
over a dustbin to clean it.
5
Put the ilter in the ilter holder and slide the ilter holder back into the appliance.
6
Put the dustbag back into the appliance, and close the cover.
Cleaning the mini turbo brush (speciic types only)
To clean the brush inside the mini turbo brush, follow the steps below:
1
Switch off and unplug the appliance.
2
Rotate the brush inside the mini turbo brush until the cutting groove faces you. Use a pair of
scissors to cut the hairs, threads etc that have collected around the brush. (Fig. 14)
3
Remove luff, hairs and other dirt from the brush.
ENGLISH
8
