Philips FC8282 - Инструкция по эксплуатации - Страница 10

guarantee and service

If you need ser vice or information or if you have a problem, please visit the Philips website at  

www.philips.com

 or contact the Philips Consumer Care Centre in your countr y (you find its 

phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your 

countr y, go to your local Philips dealer. 

troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If 

you are unable to solve the problem with the information below, contact the Consumer Care 

Centre in your countr y. 

Problem

Possible cause

Solution

The suction 

power is 

insufficient.

The dust container is 

full.

Empty the dust container.

The filter cylinder is 

dir ty.

Clean the filter cylinder (see chapter ‘Cleaning’).  

The Clean Air HEPA 

outlet filter is dir ty.

Replace the Clean Air HEPA outlet filter (see 

chapter ‘Replacing the Clean Air HEPA outlet 

filter).

The electronic suction 

power control is set to 

a low setting.

Set the electronic suction power control to a 

higher setting.

The nozzle, tube or 

hose may be blocked.

Disconnect the blocked-up item and connect it (as 

far as possible) the other way around. Switch on 

the vacuum cleaner to force the air through the 

blocked-up item in opposite direction.

English

10