Philips FC8272 - Инструкция по эксплуатации - Страница 8

Пылесос Philips FC8272 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 28
Загружаем инструкцию
background image

Telescopic tube with extension tube  (specific types only)

  1 

 To connect the extension tube to the bottom part of the telescopic tube, insert the narrow 

section into wider section and turn a little. 

Note: To disconnect the tube parts from each other, pull and turn a little.

  2 

  To connect the tube to the handgrip of the hose, insert the narrow section into the wider 

section and turn a little (Fig. 6).

Note: To disconnect the tube from the handgrip, pull and turn a little.

  3 

 To adjust the length of the tube to the length you find most comfortable during vacuuming, 

press the button on the tube (1) and pull the upper tube part upwards or push it downwards 

(2).  (Fig. 7)

nozzles
Connecting nozzles to the tube

  1 

 To connect a nozzle to the tube, insert the tube into the nozzle and turn a little (Fig. 8).

Note: To disconnect a nozzle from the tube, pull and turn a little.

Combination nozzle with 1 rocker switch 

You can use the combination nozzle on carpet (with the brush strips folded in) or on hard floors 

(with the brush strips folded out).

 - To clean hard floors, push the rocker switch on top of the combination nozzle with your foot to 

make the brush strips come out of the nozzle housing (Fig. 9).

 - To clean carpet, push the rocker switch to make the brush strips disappear into the 

housing (Fig. 10).

super Parquet nozzle (specific types only)

You can use the parquet nozzle to clean parquet and other types of hard floors. The parquet nozzle 

is equipped with rotating microfibre pads that gently clean and polish the floor and remove 

stubborn dir t. The nozzle loosens dir t and traps it inside the fibres of the pads. The pads in 

combination with the high suction power of this vacuum cleaner cause this nozzle to clean 3 times 

better than ordinar y nozzles.

Never use water to clean wooden floors or parquet.

small nozzle and crevice/brush nozzle

  1 

 Connect the small nozzle or crevice/brush nozzle directly to the handgrip or to the 

tube (Fig. 11).

Small nozzle: use this nozzle to clean small areas, e.g. the seats of chairs and sofas.

Crevice/brush nozzle: use the crevice side of this nozzle to clean narrow corners or hard-to-

reach places and use the brush side to clean computers, bookshelves etc.

Using the appliance

Vacuum cleaning

 - You can carr y the vacuum cleaner by the handle at the front or on top of the appliance (Fig. 12).

  1 

 Pull the mains cord out of the appliance and put the mains plug in the wall socket.

  2 

 Press the on/off button on top of the appliance with your foot to switch on 

the appliance (Fig. 13).

 - If you want to pause for a moment, inser t the ridge on the combination nozzle into the parking 

slot to park the tube in a convenient position.  (Fig. 14)

English

8

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Philips FC8272?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"