Miele SBAD3 Classic C1 - Инструкция по эксплуатации - Страница 73

en

73

How to replace the dustbag (dia. 25)



Press both release buttons at the side
of the hose connector, and lift the
hose from the socket (dia. 01).



Pull the release catch upwards and
open the dust compartment lid as far
as it will go (dia. 08).

The dustbag has a flap which closes
automatically when the dust compart-
ment lid is raised to prevent any dust
escaping.



Pull the dustbag out by the grip on
the collar.



Fit the new dustbag into the holder
as far as it will go. Leave it folded up
when you take it out of the box.



Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.

A safety device prevents the lid clos-
ing without a dustbag in place. Do
not use force!



Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into posi-
tion (dia. 01).

When to change the motor protection
filter

Replace this filter every time you start a
new packet of dustbags.
Every packet of original Miele dustbags
contains a motor protection filter. Mul-
tipacks contain four motor protection
filters (only available in selected coun-
tries).

How to change the motor protection
filter (dia. 26)



Open the dust compartment lid.



Pull the dustbag out by the grip on
the collar.



Unclip the filter frame and replace the
motor protection filter.



Close the filter frame.



Fit the dustbag into the holder as far
as it will go.



Close the dust compartment lid.

When to replace the exhaust filter
AirClean

Replace this filter every time you start a
new packet of Miele dustbags. Every
packet of original Miele dustbags con-
tains one AirClean exhaust filter. Mul-
tipacks contain four AirClean filters
(only available in selected countries).

How to replace the AirClean exhaust
filter (dia. 27)

Do not use more than one exhaust fil-
ter at a time.



Open the dust compartment lid.



Release the filter grille and raise it
upwards. Grasp the used AirClean
filter by the clean, unsoiled section
(see arrow) and take it out.



Replace it with a new AirClean ex-
haust filter.

If you wish to fit an Active AirClean
30 or a HEPA AirClean 30 filter, see
“Maintenance - Replacing one type
of exhaust filter with another”.