Miele SBAD3 Classic C1 Parquet Graphite/Grey - Инструкция по эксплуатации - Страница 43

en

43

To open the air inlet valve (dia. 20)

It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.



Open the air inlet valve on the handle
far enough to reduce the suction
power.

The floorhead will be easier to man-
oeuvre. Close the valve when you are
ready to use full power again.

Setting down and storing the
vacuum cleaner

Park System for pauses during vacu-
uming (dia. 21)

The Park System allows you to conveni-
ently park the suction tube and floor-
head during brief pauses.



Slot the floorhead into the slot in the
parking attachment.

If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp,
- retract the telescopic suction tube
fully
- do not use the park system if your
vacuum cleaner has an EasyLock
suction tube.

Park System for storage (dia. 22 + 23)



Always disconnect the vacuum

cleaner from the electrical supply
when you have finished using it.
Switch it off at the wall socket and
unplug it.



Stand the vacuum cleaner upright.

If your vacuum cleaner has a tele-
scopic suction tube, retract the tubes
fully so that it takes up less room for
storage.



Slot the floorhead downwards into
the parking attachment.

If your vacuum cleaner has an Easy-
Lock suction tube you can separate the
two sections for storage purposes.



Press the release button on the lower
section and pull the top section out.



Push the connection piece attached
to the upper tube into the lower tube.

Maintenance



Always disconnect the vacuum

cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.

The Miele filtration system consists of
three components:

– Original Miele dustbag

– Motor protection filter

– Original Miele exhaust filter

These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.