JIMMY JV85 - Инструкция по эксплуатации - Страница 7

5

Use of Vacuum

Attention: When use the product for first time, 
battery power is not full. Need to charge the 
vacuum before using.

Charging holder assembly

Assembly method one: Put the vacuum cleaner in 
the holder, and lean the vacuum cleaner against the 
wall, place the holder in the position that vacuum 
cleaner floorhead does not touch ground. Take off 
the handheld vacuum cleaner,  follow Fig to place 
expansion pipe on the wall and follow Fig to place 
the holder to the expansion pipe position, and lock 
in the screw. After assembly completed, put the 
vacuum to charger holder to charge or store. 

Attention: Do not fix the holder to bathroom or other humid 

wall.

Expansion pipe

Charging holder

Charging holder

4

5

Charging of vacuum cleaner

When the vacuum cleaner power is insufficient, 
charge the vacuum cleaner in time ; When the 
voltage is too low,to protect the battery, vacuum 
cleaner will be automatic power-off,at this time 

the vacuum cleaner need to be charged.When charging, plug the charger connector into the A/
C power socket,hang the handheld vacuum cleaner on the holder to start charging.When the 
handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum 
cleaner is charging. When charging is completed, LED display show 100% power.

After charging, please pull the charger plug off power socket and stop charging.

Attention: if power cord is damaged, to avoid danger, it must be replaced by a professional people of the 

manufacturer, repair ing agent or similar department.

6

7