JIMMY JV35 - Инструкция по эксплуатации - Страница 6

3

Cleaning and Maintenance

Notice:

1. Filters are available at dealers.

2.  It is recommended to clean the dust cup after each 

use. when the filter is blocked due to excessive dust 

accumulation, it needs to be cleaned and replaced if 

necessary.

Dust Cup Cleaning

1. Turn off the machine and unplug the power 

cord. Then press the release button and lift 
upward (Figure 1).

2. Twist dust dust lid anticlockwise (Figure 2) and 

remove it from dust cup to clean (Figure 3).

3. Do Not tap the filter in reverse in case of dust 

clog. Clean filter and cyclone regularly for 
better use.

4. After cleaning, assemble parts in reverse 

order. Do Not miss the filter, filter missing can 

cause product failure.

    Notice:  Use water or neutral reagents to clean dust cup 

and wipe with dry cloths. The filter cannot be 

washed.  Make  sure  the  filter  and  dust  cup  are 

completely dry before another use.

Brushroll Cleaning

Turn off the machine and unplug the power 
cord, rotate the lock knob with a coin or flat-
blade screwdriver from locked position to unlock 
position (Figure 5) to remove the cover and 
roller brush (Figure 6).

After  cleaning,  snap  the  hex-gear  side  into  the 

base first (Figure 7) and press the other side 
(Figure 8). Install the cover in reverse order of 
removing.

    Notice:  For safety reasons, please turn off the machine 

a n d   u n p l u g   p o w e r   c o r d   b e f o r e   c l e a n i n g 

brushroll.

Dust Cup Release 

Button

1

2

Dust 

Cup Lid

Filter

Cyclone

Brush

Brushroll

Brushroll Cover

3

4

5

Tapping Downward

7-2

8

Belt

Hex-side

Four-corner Side

6

7-1

Hex-gear