Пылесос Dyson V11 Absolute SV15, никель/синий - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3-4.5hrs
clik
Boost
Eco
Auto
Med
100%
English
Espanol
English
English
selected
4
:
50
Auto
Low
run time
Exit
Off
On
clik
clik
clik
clik
clik
clik
2
1
3
clik
clik
clik
clik
7
Charging and storing
your machine
Connect to the charger either directly
or in the docking station.
The blue LEDs on either side of the
battery will flash during charging.
When the battery is fully charged,
both LEDs will light for 5 seconds.
Changing your battery
To remove a battery
Hold your hand under the
battery to support it.
Press the battery release
button and slide the battery
off the handle.
Place the battery on charge.
Where you have additional batteries, we
recommend that you alternate the batteries to
maintain even performance.
It's important to fully charge your new machine before
using it for the first time, and after every clean. This is
because the battery and monitoring system's algorithm
'learns' over time, and fully charging your machine
helps it to more accurately calculate and display
remaining run time.
To install a battery
Slide the battery onto
the handle until it clicks
securely in place.
Be careful not to pull the power trigger
while the clear bin is open for emptying.
Close the clear bin by pushing the bin base
upwards until the clear bin and bin base click
into place.
Your machine won't operate if the
ambient temperature is below 0°C
(32°F). This is designed to protect
both the motor and battery.
Emptying your clear bin
Your battery is fully charged when
the display shows 100%.
