Dreame Wet and Dry Cleaner H11 Max Black (VWV8) - Инструкция по эксплуатации - Страница 23

18

EN

FAQ

Error

Possible Cause

Solution

The battery 

status indicator 

does not light up 

while charging.

The charging base is not 

connected to the vacuum 

properly.

Make sure the vacuum is in 

place.

No water flow 

comes out of the 

vacuum.

The clean water tank has not 

been installed in place, or the 

clean water tank is empty.

Reinstall or fill the clean 

water tank.

Water leakage 

from the top of 

the dirty water 

tank.

A collision or a sharp pull 

causes water to enter the 

motor.

Move gently back and forth 

when the vacuum is turned 

on.

The filter is not completely dry 

after being cleaned.

Thoroughly dry the filter 

before use.

Self-cleaning 

failed.

The roller brush may be 

jammed by large particles.

Open the brush cover to 

check and clean the roller 

brush.

The vacuum is not being 

charged.

Make sure the vacuum is 

charged before activating 

the self-cleaning function.

The self-cleaning cannot be 

started if the battery level is 

less than 10%.

The self-cleaning function 

can be enabled only when 

the vacuum is charged and 

the battery level is more 

than 10%.

The dirty water tank has not 

been installed in place, or the 

dirty water tank is full.

Reinstall or empty the dirty 

water tank.

The clean water tank has not 

been installed in place, or the 

clean water tank is empty.

Reinstall or fill the clean 

water tank.