Dreame Cordless Vacuum Cleaner T10 - Инструкция по эксплуатации - Страница 8

11

12

Care & Maintenance

2. Rinse the HEPA filter and foam pad with water. To thoroughly remove all dust caught in 

the filter, rotate the HEPA filter by 360 degrees while rinsing. Lightly tap the filter against a 

sink several times to remove any excess debris.Keep the HEPA filter in a well-ventilated 

and cool place to fully dry.
Note: Fully dry the filter (at least 24 hours) before reinstalling it.

Cleaning the HEPA Filter Assembly

Cleaning the Cyclone Assembly

Care & Maintenance

12

6

1

11

5

7

2

10

4

8

3

9

24 hrs

1. Rotate the cyclone assembly in the direction illustrated to unlock it, then remove the cyclone 

assembly.

1. Place the vacuum securely on a flat surface, then turn the HEPA filter assembly cover in the 

direction indicated and remove the HEPA filter assembly.
Note: Remove the built-in foam pad before cleaning the HEPA filter assembly. Rinse the HEPA 

filter and foam pad with water.

2. Rinse the cyclone assembly with water until it is clean. To thoroughly dry the cyclone 

assembly, keep it in a ventilated or cool place for at least 24 hours. Caution: Do not clean the 

cyclone assembly in a dishwasher or washing machine, and do not attempt to dry it in a tumble 

dryer, oven, microwave, or near an open fire.
3. Once it is dry, reinstall the cyclone assembly.

12

6

1

11

5

7

2

10

4

8

3

9

24 hrs

1

2

1

2

3