Deerma DX118C - Инструкция по эксплуатации - Страница 2

1 P

2 P

Handle

Power cord hook 

Metal tube

Power cord

Dust panel 

frame switch

Power switch

Machine body

Strainer

Round brush

Ground brush

Dust panel frame

This  diagram  is  for  reference  only.  No  further  notice  will  be  issued  in 
case  of  any  change.  The  product  is  subject  to  the  real  object,  and  our 
company reserves all the right for final interpretation.

1.  The  vacuum  cleaner  is  an  electric  appliance  that  must  be  used  in 
accordance  with  the  conditions  in  the  Manual.  Propery  keep  the  Manual 
for future reference.
2. Check and confirm that the vacuum cleaner must be used in the same 
voltage as the supply voltage.
3.  Do  not  handle  the  following  objects,  otherwise  it  may  damage  the 
vacuum  cleaner  or  cause  fire,  resulting  in  personal  injury  and  other 
accidents.
A. A hot object, such as carbon fire; 
B. Large sharp fragments, such as glass;
C. Harmful objects or water and liquids (solent and corrodent); 
D.  Flammable  and  explosive  materials,  such  as  gasoline  or  alcohol 
products.
4.  Turn  off  the  power  when  cleaning,  repairing,  or  temporarily  not  using 
the  vacuum  cleaner.  When  turning  off  the  power,  do  not  pull  the  power 
cord. Hold the plastic part of the plug to remove the plug
5.  Do  not  immerse  the  main  machine  of  the  vacuum  cleaner  in  water  to 
avoid exposure to heaters or blazing sun, and to avoid fire.
6.  Children  are  not  allowed  to  play  with  the  vacuum  cleaner,  so  as  to 
avoid accidents.
7.  Do  not  use  the  vacuum  cleaner  in  the  following  situations:  A.  Falling 
and obvious damage or abnormal operation; 
B. Damaged power cord.
In  this  case,  do  not  open  the  machine  but  send  the  machine  to  the 
designated maintenance department of the company for maintenance.
8.  Avoid  long-term  operation  when  the  suction  inlet  is  blocked,  so  as  to 
avoid damage to the motor or the vacuum cleaner deformation caused by 
heating.
9. The power cord of the product is connected with the motor by Y type. 
If  the  power  cord  is  damaged,  it  must  be  replaced  with  special 
equipment, or repaired by the professional maintenance department.

1

2