Пылесос Bosch BSG 8PRO1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
en
Disposal information
䡲
Packaging
The packaging is designed to protect the
vacuum cleaner from being damaged dur-
ing transport.
It is made of environmentally-friendly mate-
rials and can be recycled.
Dispose of packaging that is no longer
required at an appropriate recycling point.
䡲
Used vacuum cleaners
Used vacuum cleaners still contain many
recyclable materials.
Therefore, please take used vacuum clean-
ers to your retailer or recycling centre so
that they can be recycled.
For current disposal methods, please
enquire at your appliance dealership or
local council.
!
Please note
Only connect the appliance to a socket
rated for at least 16 amps.
If a fuse is tripped when you switch on the
vacuum cleaner, this may be because other
electrical appliances which have a high
current draw are connected to the same
power circuit.
To prevent the fuse from tripping, select
the lowest power setting before switching
the vacuum cleaner on, and increase the
power only once it is running.
Your appliance is equipped with the
following additional features:
䡲
Metal sleeve on the handle to avoid wear.
䡲
Metal wheels, for increased durability.
䡲
Professional fabric hose to extend service
life and increase the maximum load of the
hose.
䡲
Professional accessories case provides a
practical and safe place to store
professional accessories.
Fold out picture pages.
Setting up
Figure
a)
Insert the flexible hose adapter into the air
intake opening and allow it to engage.
b)
To remove the flexible hose, press the two
lugs together and pull the tube out.
Figure
a)
Align and connect the handle and the tele-
scopic tube.
b)
Push the handle straight into the telescop-
ic tube until it engages.
To release the connection, squeeze the col-
lar sleeve and pull the handle out.
Figure
a)
Connect the floor tool and the telescopic
tube together.
b)
Push the telescopic tube straight into the
connecting piece of the floor tool until it
engages.
To release the connection, squeeze the
locking collar and pull the telescopic tube
out.
3*
2*
1
