Пылесос Bosch BSG 72530 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
39
Figure
Other accessories that you do not need can be stored
easily in the accessories compartment of the vacuum
cleaner lid.
Figure
Matress nozzle
(attach to handle or suction pipe as required).
For cleaning mattresses, upholstery, etc.
Figure
䡲
Secure the drill dust nozzle to the handle and then place
against the wall, so that the nozzle drill hole opening sits
directly over the hole to be drilled.
䡲
Select the lowest power setting and then switch on the
vacuum cleaner.
䡲
Suction holds the drill dust nozzle in the required
position. Depending on the surface of the wall to be
drilled it may be necessary to readjust the power to a
higher setting to ensure the drill dust nozzle is firmly
attached.
Any fine particles are automatically vacuumed up.
Figure
Pet hair tool
䡲
Floor tool for easy and thorough vacuuming of pet hair.
䡲
Push the telescopic tube into the connecting piece of the
pet hair tool until it engages.
Press on the locking collar and pull out the telescopic
tube to disconnect.
䡲
To clean, simply vacuum the tool using the suction
pipe/telescopic tube.
Hard-floor brush
Figure
For vacuuming hard floor coverings (tiles, parquet floor-
ing, etc.)
Push the telescopic tube into the connecting piece of
the hard-floor brush until it engages.
Press on the unlatching sleeve and pull out the telescop-
ic tube to disconnect.
Cleaning the hard-floor brush
Figure
a)
Vacuum from below to clean the brushes.
b)
Cut off any wrapped around hair or threads using a pair
of scissors.
Then vacuum up the threads and hair using the corner
nozzle.
Figure
Once you have switched off the vacuum cleaner, you can
use the parking aid on the back of the vacuum cleaner if
you wish to stop vacuuming for a short time.
To do this, slide the catch on the floor tool into the
groove on the back of the vacuum cleaner.
17
16*
15*
14*
13*
12*
11
Figure
The vacuum cleaner can also be carried using the swing
handle to overcome obstacles, e.g. steps.
When the work is done
Figure
䡲
Unplug the vacuum cleaner.
䡲
Briefly pull the power cord and release. The cord rewinds
automatically.
Figure
To store or transport the vacuum cleaner, use the storage
aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the catch
on the floor tool into the groove on the underside of the
vacuum cleaner.
Changing the dust bag and filters
Replacing the dust bag
Figure
If the dust bag change indicator is completely yellow
when the floor tool is lifted from the floor and the highest
suction power is selected, the dust bag must be
changed, even though it may not yet be full. In this case
it is essential to change the dust bag due to the type of
material it contains.
First check that the nozzle, suction pipe and flexible hose
are not blocked, as this would also lead to the dust bag
change indicator being triggered.
Figure
Open the lid by moving the locking lever in the direction
of the arrow.
Figure
a)
Seal the dust bag by pulling the sealing strip and then
remove it.
b)
Insert a new dust bag into the holder and close the dust
bag compartment lid.
!
Caution: the lid will only close when the dust bag is
inserted.
23
22
21
20
19
18
