Bosch BSG 72212 - Инструкция по эксплуатации - Страница 22

17

en

Replacing the micro-hygiene filter

Figure 

䡲

Open the dust bag compartment lid 
(see Figure 21).

䡲

Release the filter holder by pressing the
locking tab in the direction of the arrow

䡲

Remove the foam filter and micro-hygiene
filter.
Insert the new micro-hygiene filter and
foam filter into the filter holder.

䡲

Insert the filter holder into the vacuum
cleaner and clip into place.

Replacing the micro active carbon filter

Figure 

䡲

Open the dust bag compartment lid 
(see Figure 21).

䡲

Release the filter holder by moving the
locking lever in the direction of the arrow.

䡲

Remove the micro active carbon filter.

䡲

Insert the new micro active carbon filter
into the vacuum cleaner and clip into
place.

Replacing the HEPA filter

Figure 

䡲

Open the dust bag compartment lid 
(see Figure 21).

䡲

Release the HEPA filter by pressing the
locking tab in the direction of the arrow
and remove it from the vacuum cleaner 
(see Figure 29).

䡲

Insert the new HEPA filter and clip into
place.

If you have used the vacuum cleaner for fine
dust particles, clean the motor protection
filter by knocking out the dirt and, if
necessary, replace the micro hygiene filter,
active carbon filter or HEPA filter.

31*

30*

29*

Care

Always switch off the vacuum cleaner and
disconnect the power cord from the mains
before cleaning the vacuum cleaner.
The vacuum cleaner and plastic accessories
can be cleaned with a commercial plastic
cleaner.

!

Do not use a scourer, glass-cleaning
agent or all-purpose cleaning product. 
Never immerse the vacuum cleaner in
water.

The dust compartment can, if necessary, be
cleaned with a second vacuum cleaner or
simply wiped with a dry cloth or dusting brush.

Subject to technical modifications.