Bort BSS-1215-Aqua - Инструкция по эксплуатации - Страница 3

3

Vacuum cleaner for dry and wet 

cleaning

Product introduction

The  vacuum  cleaner  BSS-1

2

15-Aqua  is  mainly  for 

home  use,  which  has  multi  functions  of  wet  &  dry  with 

rear  blow  function .  It  can  be  operated  easily  and  safely . 

To  avoid  wa-ter  to  goes  into  the  motor  house,  doesn’t 

collect water up-per MAX level of water . 

Technical specifications (fig. 1)

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions .

Failure to follow the warnings and instructions may result 

in electric shock, fire and/or serious injury .

Save all warnings and instructions for future reference .

The term “power tool” in the warnings refers to your main-

soperated (corded) power tool or battery-operated (cord-

less) power tool .

Work area safety

• Keep work area clean and well lit . Cluttered or dark areas 

invite accidents .

• Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust . Power tools create sparks which may ignite the dust 

or fumes .

• Keep children and bystanders away while operating a

power tool . Distractions can cause you to lose control .

Electrical safety

• Power tool plugs must match the outlet . Never modify

the plug in any way . Do not use any adapter plugs with 

earthed (grounded) power tools . Unmodified plugs and 

matching outlets will reduce risk of electric shock .

• Avoid body contact with earthed or grounded surfaces, 

English

such as pipes, radiators, ranges and refrigerators . There is 

an increased risk of electric shock if your body is earthed 

or grounded .

• Do not expose power tools to rain or wet conditions . Wa-

ter entering a power tool will increase the risk of electric 

shock .

• Do not abuse the cord . Never use the cord for carrying,

pulling or unplugging the power tool . Keep cord away

from heat, oil, sharp edges and moving parts . Damaged 

or entangled cords increase the risk of electric shock .

•  When operating a power tool outdoors, use an extension 

cord suitable for outdoor use . Use of a cord suitable for

outdoor use reduces the risk of electric shock .

• If operating a power tool in a damp location is unavoida-

ble, use a residual current device (RCD) protected supply . 

Use of an RCD reduces the risk of electric shock .

Personal safety

• Stay alert, watch what you are doing and use common

sense when operating a power tool . Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication . A moment of inattention while

operating power tools may result in serious personal

injury .

• Use personal protective equipment . Always wear eye

protection . Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal in-

juries .

• Prevent unintentional starting . Ensure the switch is in

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool . Carrying 

power tools with your finger on the switch or energising 

power tools that have the switch on invites accidents .

• Remove any adjusting key or wrench before turning the 

power tool on . A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury .

• Do not overreach . Keep proper footing and balance at

all times . This enables better control of the power tool in 

unexpected situations .

• Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from moving

parts . Loose clothes, jewellery or long hair can be caught 

in moving parts .

• If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 

and properly used . Use of dust collection can reduce

dust-related hazards .

Power tool use and care

• Do not force the power tool . Use the correct power tool 

for your application . The correct power tool will do the

job better and safer at the rate for which it was designed .

• Do not use the power tool if the switch does not turn it 

on and off . Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired .

• Disconnect the plug from the power source and/or the

battery pack from the power tool before making any ad-

justments, changing accessories, or storing power tools . 

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally .