Philips DVP632 - Инструкция по эксплуатации - Страница 2

/02b_8239 210 98393

Important notes for users in the
U.K.

Mains plug

This apparatus is fitted with an approved 13
Amp plug.  To change a fuse in this type of plug
proceed as follows:

1

Remove fuse cover and fuse.

2

Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.

3

Refit the fuse cover.

If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse
is used, the fuse at the distribution board
should not be greater than 5 Amp.

Note:  The severed plug must be disposed to
avoid a possible shock hazard should it be
inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with
the following code: blue = neutral (N),
brown = live (L).

¶

As these colours may not correspond with the
colour markings identifying the terminals in
your plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or coloured black.
– Connect the brown wire to the terminal
marked L or coloured red.
– Do not connect either wire to the ear th
terminal in the plug, marked E (or 

e

) or

coloured green (or green and yellow).

Before replacing the plug cover, make cer tain
that the cord grip is clamped over the sheath
of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may
require consent. See Copyright Act 1956 and
The Performer’s Protection Acts 1958 to 1972.

CAUTION

Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous
radiation exposure or other unsafe
operation.

VAROITUS

Muiden kuin tässä esitettyjen
toimintojen säädön tai asetusten
muutto saattaa altistaa vaaralliselle
säteilylle tai muille vaarallisille
toiminnoille.

01-36 DVP630_Fin_02b1

17/03/2004, 4:57 PM

2