Проигрыватели LG DV375 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Connections (Continued)
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables
(A)
.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
11
Connect one of the DVD Player’s DIGITAL AUDIO
OUT jacks (OPTICAL
O
or COAXIAL
X
) to the
corresponding in jack on your amplifier. Use an
optional digital (optical
O
or coaxial
X
) audio cable.
2
2
You will need to activate the player’s digital output.
(See “Digital Audio Output” on page 13).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the on-
screen display, press AUDIO.
Analog connection to a multi-channel A/V receiver
with 6 Channel connectors (Dolby Digital)
This DVD Player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
11
Connect the CENTER and WOOFER jacks for the
Center speaker and the Subwoofer
(C)
to the corre-
sponding in jacks on your receiver.
2
2
Connect the Left and Right FRONT speaker jacks
(F)
to the corresponding in jacks on your receiver.
3
3
Connect the Left and Right REAR speaker jacks
(R)
to the corresponding in jacks on your receiver.
4
4
Make the appropriate Sound settings for Analog
Output and Speaker Settings in the setup menu.
See page 13.
10
Amplifier (Receiver)
Rear of DVD player
A
X
O
R
L
AUDIO INPUT
DIGITAL INPUT
OPTICAL
COAXIAL
SCART INPUT
T
ANALOG 5.1CH AUDIO INPUT
Rear R
Rear L
Front R
Front L
Subwoofer
Center
Amplifier
(Receiver)
Rear of
DVD player
F
C
R
