Xerox Phaser 6250 - Инструкция по эксплуатации - Страница 194

Цветной лазерный принтер Phaser® 6250

E-3

Section 4–First Aid Measures

Inhalation

: Remove person to fresh air. Seek medical attention if symptoms occur.

Eyes

: If particles get into eye, flush thoroughly with water. Seek medical attention if 

symptoms occur. 

Skin

: Wash thoroughly with soap and water. Seek medical attention if symptoms occur.

Ingestion

: Dilute stomach contents with several glasses of water. Seek medical attention 

if symptoms occur.

Section 5–Fire Fighting Measures

Flash Point

: Not applicable

Fire and Explosion Hazards

: Toner is a combustible powder. Like most organic 

powders, it can form explosive mixtures when dispersed in air. 

Extinguishing Methods

: Water, dry chemical, carbon dioxide, or foam. 

Fire Fighting Information

: Avoid inhalation of smoke. As for any fire, wear protective 

clothing and self-contained breathing apparatus. 

Section 6–Accidental Release Measures

Spill or leak

: Sweep up or vacuum spilled materials and carefully transfer into sealable 

waste container. Sweep slowly to minimize generation of dust during clean up. If a 
vacuum is used, the motor must be rated as dust tight. A conductive hose bonded to the 
machine should be used to reduce static buildup. Clean up residue if necessary with 
soap and cold water. Wash or dry clean garments after removing loose toner.

Section 7–Handling and Storage

Handling

: No special precautions, when used as intended.

Storage

: Avoid high temperatures.

Section 8–Exposure Control - Personal Protection

No special personal protection indicated, when used as intended in Xerox Phaser color 
printers.

Threshold Limit Value (TLV)

: 10 mg/m

3

 (total dust)

Permissible Exposure Limit (PEL)

: 15 mg/m

3

 (total dust); 5 mg/m

3

 (respirable dust)

Short Term Exposure Limit (STEL)

: None established

Ceiling Limit

: None established

Xerox Exposure Limit (XEL)

: 2.5 mg/m

3

 (total dust); 0.4 mg/m

3

 (respirable dust)