Smeg STA4645 - Инструкция по эксплуатации - Страница 20

User instructions

25

3.2  Using the rinse aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the
inner part of the door: the 

detergent dispenser 

is on the left,

and the 

rinse aid dispenser 

is on the right.

With the exception of the 

SOAK

 program, before every washing cycle it is necessary to add the

required amount of detergent to the 

detergent dispenser

. The rinse aid, on the other hand, should

only be added as required.

ADDING THE RINSE AID

The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining;
it is automatically added to the water during the final rinse cycle, from the container situated on the
inner side of the door.

To add rinse aid:

•

Open the door.

•

Rotate the container cap anticlockwise by ¼ of a turn and remove it.

•

Add the rinse aid until the container is full (approximately 140 cc). The optical level indicator on
the side of the cap should be completely obscured. Refill the rinse aid when the optical level
indicator becomes clear again, or when the rinse aid warning light illuminates.

•

Replace the cover and turn it in a clockwise direction.

•

Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess
foam.

ADJUSTING THE RINSE AID DISPENSER SETTING

The dishwasher is factory set for medium water hardness. However it possible to change the
setting by turning the dispenser’s selector to the desired position: the amount of rinse aid
dispensed is proportional to the selector position.

•

To adjust the rinse aid setting, rotate the dispenser cap through a quarter turn in an
anticlockwise direction and remove it.

•

Then use a screwdriver to rotate the rinse aid selector to the desired position.

•

Replace the cap, turning it clockwise.

•

The amount of rinse aid must be 

increased

 if the washed dishes appear dull or feature circular

stains.

•

If, on the other hand, the dishes are sticky or have white streaks, it is necessary to 

reduce

 the

rinse aid setting.