Smeg LSA4647X7 - Инструкция по эксплуатации - Страница 6

User instructions

PROGRAMMING

In this model of dishwasher, all programming procedures can only be
carried out with the door closed. As long as the door is open, the

PROGRAMS 

lights

 (6)

 and 

PHASES/PROGRAM 

lights

 (8) 

will remain

off.

SELECTION PROGRAM

The program selection is possible
through the relative buttons 

(2)

.

When the button relating to the program required is pressed, the relative
light will come on to confirm the operation.

START PROGRAM

To start the dishwasher, press the 

START/PAUSE

 button

 (

4

)

 for a few

seconds, until the light of the first phase of the selected program starts to
flash (confirmation beep).
This phase, that updates itself during the cycle, is “indicative” since it is
influenced by the washing conditions such as dishwasher type and
quantity, entry temperature etc. For this reason it is normal to see the
updating during a program (increment and decrease of minutes)
specially in the passage from one phase to the other (for example, from
washing to rinse).

As the program runs, the 

PHASES/PROGRAM 

lights

 (

8

)

 will indicate

the current cycle status.

The light of the phase in progress will
flash, while the lights of the previous and
subsequent phases remain on.

N.B.

 during execution of programs which

do not include a prewash, the first

PHASES/PROGRAM 

light

 (

8

)

 will remain

off.

Prewash

Wash

Rinse

Dry