Miele G6060 SCVi - Инструкция по эксплуатации - Страница 83

Plumbing

83

The Miele waterproof anti-leak
system

Provided your dishwasher has been in-
stalled correctly, the Miele WaterProof
System will protect you from water
damage throughout its lifetime.

Connection to the water supply



Water in the dishwasher must

not be used as drinking water.

– The dishwasher may be connected to

a cold or hot water supply, max.
60 °C. 
We would only recommend connec-
tion to a hot water supply if it is eco-
nomical, e.g. a solar powered supply.
When connected to a hot water sup-
ply all programme stages which
would otherwise be carried out with
cold water will be carried out with hot
water.

– The inlet hose is approx. 1.5 m long.

A 1.5 m long flexible metal extension
hose (pressure tested to 14000
kPa/140 bar) is available as an op-
tional accessory, if required.

– A stopcock with a 3/4" male thread

must be provided on site.

– This appliance is constructed to

comply with IEC/EN/DIN 61770 //
VDE 0700 Section 600, and may be
connected to a suitable supply
without an extra non-return valve if
national regulations permit.

– The water pressure (flow pressure at

the take-off point) must be between
50 and 1000 kPa (0.5 and 10  bar). If
the water pressure is too high, a
pressure reducer valve must be fitted.

After connecting the dishwasher to
the water supply, check that all
plumbing connections are watertight.



To avoid any damage to the ap-

pliance, the dishwasher must only be
operated when it is connected to a
fully vented plumbing system.



The inlet hose must not be

shortened or damaged in any way as
it contains electrical components
(see illustration).