Miele G 7460 SCVi - Инструкция по эксплуатации - Страница 25

Before using for the first time

25

Setting the time of day

The time of day is set automatically if
a connection is established with the
WiFi network.

The display will then change to the
screen for setting the time of day.

The current time of day must be set be-
fore you can use the timer option.



Use the 



 sensor controls to enter

the hour and confirm your entry by
touching 

OK

.



Then set the minutes and confirm
with 

OK

.

Holding down the relevant 



 or



 sensor control will increase or de-

crease the time automatically.

Setting the water hardness level

The display will change to the screen
for setting the water hardness.

- You should programme the dish-

washer to the correct water hardness
for your area.

- Your local water authority will be able

to advise you of the water hardness
level in your area.

- Where the water hardness fluctuates

e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale) always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °dH in this ex-
ample).

In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.

Therefore, please enter the water hard-
ness:

____________°dH or mmol/l

The dishwasher is programmed at the
factory for a water hardness level of
2.5 mmol/l (14 °dH – German scale).



Set the water hardness level in your
area and confirm using 

OK

.

See the “Settings” chapter, “Water
hardness” section for more informa-
tion.