Посудомоечные машины Kuppersbusch IGVS 6509.2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
en
21
... when the appliance is
switched on
The appliance does not start.
–
The mains fuse has tripped.
–
The appliance plug has not been
inserted.
–
The appliance door has not been shut
properly.
... changing settings
A setting cannot be changed, a
programme starts.
–
Wrong programme button pressed.
Terminate the programme (see chapter
entitled “Terminating the programme
(Reset)”) and start all over again.
–
You did not wait until programme
ended.
... on the appliance
Lower spray arm rotates sluggishly.
–
Spray arm blocked.
The door is difficult to open. *
–
Child-proof lock is activated. The
deactivation instructions are at the
back in the envelope.
* depending on model
Door cannot be closed.
–
Door lock has been activated. To reset,
close the door with greater force.
Cover on the detergent dispenser cannot
be closed.
–
Detergent dispenser overfilled or
mechanism blocked by sticky
detergent residue.
Detergent residue in the detergent
dispenser.
–
Dispenser was damp when filled.
“Check water supply” display
8
lights
up.
–
Tap turned off.
–
Water supply interrupted.
–
Supply hose kinked.
–
Filter in the water supply blocked.
–
Switch off the appliance and pull
out the mains plug.
–
Turn off the tap.
–
Clean filter in the supply hose.
–
Reconnect power supply.
–
Turn on the tap.
–
Switch on the appliance.
–
Water is left in the appliance
at the end of the programme.
–
(
“
:
ƒ…
)
Waste water hose
is blocked or kinked.
Filters blocked.
–
(
“
:
Ġ
)
Waste water pump blocked,
cover on the waste water pump
is not locked in position
(see Waste water pump).
–
Filters blocked.
–
The programme has not yet ended.
Wait until programme ends (digital
display indicates
‹
:
‹‹
) or
implement the “Reset” function.
Error code
“
:
ƒƒ
–
Filters
1R
are soiled or blocked.
Refill indicator for salt
@
and/or rinse-
aid
H
is not lit.
–
Refill indicator/s switched off.
–
Adequate salt/rinse-aid available.
Refill indicator for special salt
@
is lit.
–
No salt.
Refill with special salt.
–
Sensor does not detect salt tablets.
Use different special salt.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
