KRAFT TCH-DM604D1202SBI - Инструкция по эксплуатации - Страница 50

ВСТРАИВАЕМАЯ ПОСУДОМОЕЧНАЯ МАШИНА

BUILT-IN DISHWASHER

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

50

Problem

Possible Causes

What To Do

Suds in the tub

Wrong detergent.

Use only the special dishwasher detergent to avoid suds. If 

this occurs, open the dishwasher and let suds evaporate. 

Add 1 gallon of cold water to the bottom of the dishwasher. 

Close the dishwasher door, then select any cycle. Initially, 

the dishwasher will drain out the water. Open the door 

after draining stage is complete and check if the suds have 

disappeared. Repeat if necessary.

Spilled rinse-aid.

Always wipe up rinse-aid spills immediately.

Stained tub 

interior

Detergent with colourant may

have been used.

Make sure that the detergent has no colourant.

White film on 

inside surface

Hard water minerals.

To clean the interior, use a damp sponge with dishwasher 

detergent and wear rubber gloves. Never use any other 

cleaner than dishwasher detergent otherwise, it may cause 

foaming or suds.

There are rust 

stains on cutlery

The affected items are not 

corrosion resistant.

Avoid washing items that are not corrosion resistant in the 

dishwasher.

A program was not run after 

dishwasher salt was added. 

Traces of salt have gotten 

into the wash cycle.

Always run a wash program without any crockery after 

adding salt. Do not select the Turbo function (if present), 

after adding dishwasher salt.

The lid of the softer is loose.

Check the softener lid is secure.

Knocking noise in 

the dishwasher

A spray arm is knocking 

against an item in a basket

Interrupt the program and rearrange the items which are 

obstructing the spray arm.

Rattling noise in 

the dishwasher

Items of crockery are loose in 

the dishwasher.

Interrupt the program and rearrange the items of crockery.

Knocking noise in 

the water pipes

This may be caused by on-

site installation or the cross-

section of the piping.

This has no influence on the dishwasher function. If in 

doubt, contact a qualified plumber.

The dishes are 

not clean

The dishes

are not clean

See PART II “Preparing And Loading Dishes”. 

The program was

not powerful enough.

Select a more intensive program.

Not enough detergent

was dispensed.

Use more detergent, or change

your detergent.

Items are blocking the 

movement of the spray arms.

Rearrange the items so that the spray

can rotate freely.

The filter combination is not 

clean or is not correctly fitted 

in the base of wash cabinet.

This may cause the spray 

arm jets to get blocked.

Clean and/or fit the filter correctly.

Clean the spray arm jets.

Cloudiness on 

glassware.

Combination of soft water 

and too much detergent.

Use less detergent if you have soft water and select a 

shorter cycle to wash the glassware and to get them clean.

White spots 

appear on dishes 

and glasses.

Hard water area can cause 

limescale deposits.

Add more detergent.

Black or grey 

marks on dishes

Aluminium utensils have 

rubbed against dishes

Use a mild abrasive cleaner to eliminate those marks.