Bosch SMS4ECI26M - Инструкция по эксплуатации - Страница 46

en 

Troubleshooting

46

Fault

Cause

Troubleshooting

Tableware is not dry.

Water collects in recesses of
the tableware or cutlery.

▶

Position tableware at an angle
where possible.

The combined detergent
used has a poor drying per-
formance.

1.

Use rinse aid to improve drying per-
formance.

2.

Use a different combined detergent
with a better drying performance.

Extra Dry not activated to im-
prove drying performance.

▶

Activate Extra Dry.

Tableware removed too
early or drying process not
yet ended.

1.

Wait until the programme ends.

2.

Only remove tableware 30 minutes
after the programme has ended.

Rinse aid used has a limited
drying performance.

▶

Use a name-brand rinse aid.
Eco products may have limited ef-
fectiveness.

Appliance door does not
open automatically at the
end of the programme

▶

Adjust the appliance door as de-
scribed in the installation instruc-
tions.
The door gap must be at least
70 mm - 100 mm.

Plastic tableware is not dry.

Not a fault. As plastic does
not store heat so well, it also
does not dry as well.

▶

No remedial action possible.

Cutlery is not dry.

Cutlery not arranged prop-
erly in the cutlery basket or
cutlery drawer.

Droplets can form on the cutlery con-
tact points.

1.

"Arrange cutlery individually where
possible." 

→ 

Page 31

2.

Avoid points of contact.