SVEN PS-340 - Инструкция по эксплуатации - Страница 4

ENG

4

Portable Speaker System

with Bluetooth and FM-radio

CONNECTION AND OPERATION

Attention! The built-in battery must be charged completely prior to the application.

Speaker system battery charging

• 

Connect speaker system to a USB port of PC or USB charger using USB to USB type-C 

cable (included). When charging, the indicator shows battery charging progress.

• 

The battery is used in the speaker system as an integral part of the device, therefore 

do not try to extract or replace it, because this can result in the warranty cancellation 

or the device damage.

OPERATION MODES

Bluetooth mode

• 

Wireless data transfer via the Bluetooth protocol enables to connect speaker system to 

compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as 

walls or other electronic devices can interfere with the signal transfer.

• 

Turn on the speakers in Bluetooth mode. 

• 

It is necessary to select the search mode of devices with Bluetooth on a signal source 

(telephone, notebook, smartphone, etc.). «SVEN PS-340» message will be displayed on 

the screen which is to be connected to*.

• 

When connection is successful, there will be a short beep**.

МР3 player mode

Attention! The file system of a USB flash carrier is FAT32. Maximum volume is 32 GB.

• 

Insert the USB flash carrier into appropriate slot. If the speaker system is in turned on 

position, the playback will start automatically. Playback/Pause modes are switched over 

with the help of the button 

c

. Tracks can be controlled by buttons 

h

 (previous track) 

and and 

d

 (next track).

Radio mode

• 

To improve radio reception, connect USB to USB type-C cable (included) to the input 

i

or signal cable 3.5 mm mini-jack to 3.5 mm mini-jack (included) to input 

k

.

• 

Turn on the speaker system – press button 

g

 several times until, the radio mode will turn 

on. Long-term pressing button 

c

 activates auto search mode. After scanning completion, 

the first scanned radio station will start to operate automatically. With buttons 

d

 and 

h

select a desired radio station. 

Connecting an additional speaker

For model «SVEN PS-340» you can connect an additional speaker (Bluetooth mode only):

Attention! Before connecting an additional speaker, disconnect first speaker from  

signal source.

• 

Turn on both speakers (long press button

a

) 

and select Bluetooth mode

.

• 

On one of the speakers, press the button

b

until a beep sounds, then release it. The 

speakers will connect with each other.

• 

Then connect the speaker to the signal source (see speaker connection via Bluetooth).

Note. At the subsequent inclusion of both speakers, they will be connected 

automatically.

* You might have to enter «0000» code to connect some models of devices via Bluetooth.

** If the item has been already registered in the device list of a source, then the second 

search mode activation is not obligatory. Choose the item name «SVEN PS-340» and the 

«connect» command on the source.