SVEN PS-265 - Инструкция по эксплуатации - Страница 4

Portable Speaker System with 

Bluetooth and FM-radio

ENG

4

COnneCTIOn anD OPeraTIOn

Attention! The built-in battery must be charged completely prior to the application. 

speaker system battery charging

• 

Connect speaker system to a USB port of PC or USB charger using USB type-C to USB cable 

(included). During battery charging the indicator 

h

 is red. Indicator 

h

 goes out when the battery 

is charged.

• 

The battery is used in the speaker system as an integral part of the device, therefore do not try to

extract or replace it, because this can result in the warranty cancellation or the device damage.

OPeraTIOn MODes

Bluetooth mode

• 

Wireless data transfer via the Bluetooth protocol enables to connect speaker system to 

compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or 

other electronic devices can interfere with the signal transfer.

• 

Turn on the speaker in Bluetooth mode. 

• 

It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,

notebook, smartphone, etc.). «SVEN PS-260/265» message will be displayed on the screen which 

is to be connected to*.

• 

When connection is successful, there will be a short beep and the indication of the search 

mode on speaker system is over**.

radio mode

To improve the quality of radio reception, connect the USB type-C to USB cable (included) to the USB 

type-C input or the mini-jack signal cable to the mini-jack (included) to the AUX 

g

 input.

• 

Turn on the speaker system – press button 

d

 several times until, the Radio mode will turn on. 

Double pressing button 

d

 activates auto search mode. After scanning completion, the first 

scanned radio station will start to operate automatically. With buttons 

c

 and 

e

 (long pressing) 

select a desired radio station.

Player mode

Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB. It is not 

recommended to use the micro SD Ultra Speed.

• 

The system will enter the Player mode automatically when a carrier (USB flash or SD card) is 

connected to corresponding ports. Use button 

d

 to switch between Play/Pause modes. You can 

control tracks by using buttons 

c

 (previous track) and 

e

 (next track) (long pressing).

The use in the wired mode (aUX)

• 

Connect the 3.5 mm mini-jack cable to the 3.5 mm mini-jack (included) to the AUX 

g

 input and 

the 3.5 mm jack to the signal source.

• 

Turn on the speaker in AUX mode – press the button 

d

 several times until the speaker goes into

AUX mode.

* You might have to enter «0000» code to connect some models of devices via Bluetooth.

** If the item has been already registered in the device list of a source, then the second search 

mode activation is not obligatory. Choose the item name «SVEN PS-260/265» and the «connect» 

command on the source.