Telefunken TF-PS1281B - Инструкция по эксплуатации - Страница 5

• You can connect the audio output of an

external device to this unit, to listen to the 

audio 

playback

 of that device through the speaker.

• To connect an external audio device,

please use 

an

 AUX

 audio cable with 3.5mm-

to-3.5 mm plugs to connect the headphone 
out or audio line-out of the external device to 
the AUX input of this unit.

•

The AUX mode will be selected 
automatically.

• Turn on the external device. You can

•

Wireless audio streaming requires pairing

of a Bluetooth device (e.g. smartphone).

HOW TO PAIR YOUR DEVICE TO 

THIS UNIT:

•

Make sure the Bluetooth function is

switched on in your device (e.g. smartphone, 
tablet).

•

Switch on the unit and press the

M

  button  repeatedly  to  select  the 

Bluetooth  mode  (selected  by  default).

•

Once the Bluetooth pairing indicator

begins flashing, you will find the unit listed in 
the Bluetooth connections list of your device 
(as TF-PS12

8

1B).

•

If asked for a passcode, enter “0000”.

•

The initial setup is required only once

per device. The unit will automatically pair to 
the last paired device.

•

The LED indicator will flash when

searching for a Bluetooth device and stay 
on when the devices are paired.

•

When playing files, you can press

 the

Play/Pause button to pause and resume

playback. 

•

Press

 and hold

 the

-

or 

+

 button to

go to a previous or next track. 

Shortly 

p

ress these buttons to decrease or 

increase volume, respectively.

External device connection

Instruction Manual

4

USB operation

press

 t

he

-

and 

+

 to 

adjust the volume

level

. 

      Slight noise during playback pauses 
is not a construction defect, it is 
determined by the factory presets of the 
dynamic noise reduction system.

Playback

Turn on the device.

• When playing, you can press

 Play/Pause

to play/pause the playback. 

• During the playback you can press and

•

•

Insert a USB drive into the USB port.

The playback mode will be selected 

automatically.

hold the 

-

 or 

+

 button to go to a previous or 

next track. Shortly press these buttons to 
decrease or increase volume, respectively

.

  It may take up to 60 seconds to open 

and  verify  a  large  USB  drive  with  many 

files.

General USB notes

•

This unit is equipped with a USB port

that can read and play 

MP3, WAV, WMA, 

FLAC, AMR

 files stored on standard USB 

drives up to 32 GB.

•

FAT and FAT32 file system is supported by

this unit.

Never remove USB drives from the unit 

during playback, always stop playback, 
then press the 

M

 button to switch to another 

mode before removing the storage to 
prevent damage to your files and drives 
themselves.

TWS function

•

If you have two units at your

disposal, you can pair them to each other 
and enable the True Wireless (TWS)

stereo sound

.

•

Turn the both units on and

sw

i

tch them 

in

to the Bluetooth mode. Press 

the TWS button

 o

n

 a

n

y of the u

ni

ts.

 Make 

sure the other unit is not paired to any 

bluetooth devices.

The TWS button will 

light up

, 

in

d

i

cat

in

g that the u

ni

t

s

are paired 

successfully.

  TWS works o

n

ly 

in

 Bluetooth mode

and only in featured models

.