Edifier MP100 Plus - Инструкция по эксплуатации - Страница 6

Note: 
•  Images are for illustrative purposes only and may differ from the actual product. 
•  For the need of  technical improvement and system upgrade, information and 
    specifications contained herein may be slightly different from actual product. If  any 
    difference is found, the actual product prevails.

■

 Specifications 

Power output: 5W
Frequency response: 200Hz-18KHz
Input: 5V     1A

■

 Troubleshooting

No sound

•  Check if  the speaker is ON.
•  Try to turn up the volume using the volume control.
•  Ensure the audio cables are firmly connected and the input is set correctly on the 
    speaker.
•  Check if  there is a signal output from the audio source.

Cannot connect via Bluetooth

•  Make sure the speaker is switched to Bluetooth input. If  it is in other audio input 
    modes, Bluetooth will not connect. Disconnect from any Bluetooth device by 
    pressing and holding the "     " button, then try again.
•  Effective Bluetooth transmission range is 10 meters; please ensure that operation 
    is within that range.
•  Try another Bluetooth device for connection.

Noise coming from speakers

•  EDIFIER speakers generate little noise, while the background noise of  some audio 
    devices are too high. Please unplug audio cables and turn the volume up, if  no 
    sound can be heard at 1 meter away from the speaker, then there is no problem 
    with this product.

To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on 
www.edifier.com and review the section titled Warranty Terms.
USA and Canada: ser vice@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/
Por tuguese) for local contact information.